Part Number
Definition:
A NUT, CIRCULAR IN SHAPE, WHICH MAY HAVE WRENCHING FACILITIES SUCH AS FLATS, HOLES, PROTRUSIONS, SLOTS OR SPLINES IN OR ON THE PERIPHERY OR IN THE FACE OPPOSITE THE BEARING SURFACE. FOR ITEMS HAVING A THICKNESS (OR HEIGHT) EXCEEDING TWO TIMES THE OUTSIDE DIAMETER, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. SEE ALSO NUT (1), PLAIN, KNURLED. (WHEN HEIGHT OR THICKNESS AND/OR OUTSIDE DIAMETER IS DESIGNATED AS A TOLERANCE DIMENSION, THE MAXIMUM DIMENSION WILL BE USED TO DETERMINE COMPLIANCE.)
CAGE Information
| Code | Company |
|---|---|
| 11447 | L-3 COMMUNICATIONS CORPORATION DBA C |
Federal Supply Class
Title
NUTS AND WASHERS
Inclusions:
INCLUDES LOCKNUTS; EYE NUTS; PLAIN NUTS; CASTELLATED NUTS; WING NUTS; PLATE NUTS; PUSH ON NUTS; CONCAVE AND CONVEX WASHERS; FLAT WASHERS; KEYED WASHERS; LOCK WASHERS; SHOULDERED WASHERS; SPLIT WASHERS.
Exclusions:
EXCLUDES BEARING THRUST WASHERS (FSC 3120); SHIMS (FSC 5365); RING SPACERS (FSC 5365); PLATE SPACERS (FSC 5365); LOCK RINGS (FSC 5365).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| BZRR | THREAD SERIES | UNEF |
| MATT | MATERIAL | STEEL COMP 303 OVERALL |
| CQFM | HARDNESS RATING | NOT RATED |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| ADBG | NUT THICKNESS | 0.150 INCHES MINIMUM AND 0.170 INCHES MAXIMUM |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ACTD | NUT DIAMETER | 0.660 INCHES MINIMUM AND 0.670 INCHES MAXIMUM |
| ADBM | DRIVE POINT QUANTITY | 4 |
| AZKQ | TEMP RATING | NOT RATED |
| ADBH | DRIVE POINT WIDTH | 0.075 INCHES MINIMUM AND 0.080 INCHES MAXIMUM |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| ACTA | NUT STYLE | ROUND |
| CQJX | NOMINAL THREAD SIZE | 0.437 INCHES |
| AAJD | THREAD CLASS | 2B |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| ABQU | DRIVE POINT DEPTH | 0.075 INCHES MINIMUM AND 0.085 INCHES MAXIMUM |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |