Part Number
Definition:
AN EXTERNALLY THREADED FASTENER WHOSE THREADED PORTION IS OF ONE NOMINAL DIAMETER, AND WHOSE UNTHREADED PORTION HAS BEEN MACHINED OR GROUND IN ONE OR MORE PLACES OR OVER ITS ENTIRE LENGTH TO A MAXIMUM DIAMETER LESS THAN THE MINIMUM PITCH DIAMETER OF THE THREAD (EXCLUDES UNDERCUT FOR THREAD RELIEF). IT IS NO. 0 (0.060 IN.) (1.5 MM) OR LARGER, AND IS DESIGNED TO BE HELD OR DRIVEN WITH EITHER A WRENCH OR INSERTED DRIVER (EXCLUDING INTERNAL SOCKET AND MULTIPLE SPLINE TYPES) OR BOTH IN SIZES BELOW NO. 10 (0.190 IN.) (5 MM) AND LARGER SIZES MUST HAVE A HEAD DESIGNED FOR ANY TYPE INSERTED DRIVER (EXCLUDING INTERNAL SOCKET AND MULTIPLE SPLINE TYPES) BUT MAY ALSO BE DESIGNED FOR EXTERNAL WRENCHING. A LOCKING FEATURE MAY BE INCORPORATED IN THE DESIGN OF THE HEAD OR THREADS. SEE ALSO BOLT, EXTERNALLY RELIEVED BODY AND BOLT, INTERNAL WRENCHING.
CAGE Information
| Code | Company |
|---|---|
| 10241 | TELEPHONE SYSTEMS/COMMUNICATIONS |
Federal Supply Class
Title
SCREWS
Inclusions:
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAWC | FIRST DIAMETER FROM HEAD | 0.073 INCHES MINIMUM AND 0.083 INCHES MAXIMUM |
| AAWC | FIRST DIAMETER FROM HEAD | 0.073 INCHES MINIMUM AND 0.083 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 0.547 INCHES MINIMUM AND 0.578 INCHES MAXIMUM |
| AASK | HEAD STYLE | KNURLED NO. 1 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-W-52263 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| ABQZ | INTERNAL DRIVE STYLE | SLOT |
| AASA | THREAD LENGTH | 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM |
| MATT | MATERIAL | STEEL CORROSION RESISTING OVERALL |
| AAVA | POINT DIAMETER | 0.062 INCHES MINIMUM AND 0.078 INCHES MAXIMUM |
| ABQJ | POINT STYLE | CONE |
| CSNG | EXTERNALLY RELIEVED BODY DIAMETER QUANTITY | 1 |
| AAUY | POINT LENGTH | 0.078 INCHES NOMINAL |
| AAWH | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER | 0.349 INCHES MINIMUM AND 0.369 INCHES MAXIMUM |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AHYM | NOMINAL THREAD DIAMETER | 0.112 INCHES |
| CWDK | POINT CHAMFER ANGLE | 85.0 DEGREES MINIMUM AND 95.0 DEGREES MAXIMUM |
| THSD | THREAD SERIES DESIGNATOR | UNC |
| AAJD | THREAD CLASS | 2A |
| AASL | HEAD DIAMETER | 0.307 INCHES MINIMUM AND 0.317 INCHES MAXIMUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| AASU | HEAD HEIGHT | 0.307 INCHES MINIMUM AND 0.317 INCHES MAXIMUM |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| CMLP | THREAD QUANTITY PER INCH | 40 |