Part Number
Part Number:
NSN:
NIIN:
Item Name:
GEAR , BEVEL
Definition:
A GEAR IN THE FORM OF A FRUSTUM OF A CONE, WITH STRAIGHT, SKEWED, OR CURVED TEETH, CUT ON THE EXTERNAL FACE. SEE ALSO GEAR, ANTIBACKLASH, BEVEL.
CAGE Information
| Code | Company |
|---|---|
| 18859 | DUPLEX DIV WARNER AND SWASEY CO |
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CWCD | NOMINAL OUTSIDE DIAMETER | 7.7300 INCHES |
| CWCD | NOMINAL OUTSIDE DIAMETER | 7.7300 INCHES |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.234 INCHES FIRST END |
| AJLA | TEETH QUANTITY | 22 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.562 INCHES SECOND END |
| CWTR | HUB STYLE DESIGNATOR | PLAIN BOTH ENDS |
| AAQL | BODY STYLE | WEBBED, OFFSET, SOLID |
| CWPP | PRESSURE ANGLE | 20.0000 DEGREES |
| CWTX | HUB NOMINAL DIAMETER | 4.750 INCHES SECOND END |
| CWRS | BORE NOMINAL DIAMETER | 2.638 INCHES BOTH ENDS |
| CWMW | TEETH TYPE | SPIRAL |
| AGJS | PITCH DIAMETER | 8.7300 INCHES NOMINAL |
| CWFR | NOMINAL OVERALL LENGTH | 2.375 INCHES |
| CWQD | PITCH ANGLE | 67.7500 DEGREES |
| CWNM | TOOTH DIRECTION | LEFT |
| ABSA | SPLINE QUANTITY | 9 BOTH ENDS |
| MATT | MATERIAL | STEEL OVERALL |
| BDTX | SPLINE PITCH DIAMETER | 2.4600 INCHES NOMINAL BOTH ENDS |
| ANTP | BORE STYLE | INVOLUTE SPLINE BOTH ENDS |
| CWRM | FACE NOMINAL WIDTH | 1.750 INCHES |
| CWTX | HUB NOMINAL DIAMETER | 3.625 INCHES FIRST END |
| STYL | STYLE DESIGNATOR | SIDE FACE, PROTRUDING HUBS |
| FEAT | SPECIAL FEATURES | 1/8 IN. 45 DEG CHAMFER ON SPLINE ENDS ON FIRST END OF GEAR,1/8 IN. BY 45 DEG CHAMFER ON HUB ON BACK SIDE OF GEAR,3/16 IN. BY 45 DEG CHAMFER ON HUB ON FIRST END OF GEAR |