Part Number
Definition:
A NUT, CIRCULAR IN SHAPE, WHICH MAY HAVE WRENCHING FACILITIES SUCH AS FLATS, HOLES, PROTRUSIONS, SLOTS OR SPLINES IN OR ON THE PERIPHERY OR IN THE FACE OPPOSITE THE BEARING SURFACE. FOR ITEMS HAVING A THICKNESS (OR HEIGHT) EXCEEDING TWO TIMES THE OUTSIDE DIAMETER, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. SEE ALSO NUT (1), PLAIN, KNURLED. (WHEN HEIGHT OR THICKNESS AND/OR OUTSIDE DIAMETER IS DESIGNATED AS A TOLERANCE DIMENSION, THE MAXIMUM DIMENSION WILL BE USED TO DETERMINE COMPLIANCE.)
CAGE Information
| Code | Company |
|---|---|
| 23667 | SMITHS DETECTION-EDGEWOOD INC DIV ED |
Federal Supply Class
Title
NUTS AND WASHERS
Inclusions:
INCLUDES LOCKNUTS; EYE NUTS; PLAIN NUTS; CASTELLATED NUTS; WING NUTS; PLATE NUTS; PUSH ON NUTS; CONCAVE AND CONVEX WASHERS; FLAT WASHERS; KEYED WASHERS; LOCK WASHERS; SHOULDERED WASHERS; SPLIT WASHERS.
Exclusions:
EXCLUDES BEARING THRUST WASHERS (FSC 3120); SHIMS (FSC 5365); RING SPACERS (FSC 5365); PLATE SPACERS (FSC 5365); LOCK RINGS (FSC 5365).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ADBH | DRIVE POINT WIDTH | 0.051 INCHES MINIMUM AND 0.066 INCHES MAXIMUM |
| ABQU | DRIVE POINT DEPTH | 0.080 INCHES MINIMUM AND 0.108 INCHES MAXIMUM |
| ADBM | DRIVE POINT QUANTITY | 2 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM B16,COND 1/2 HARD ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| CQFM | HARDNESS RATING | NOT RATED |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AZKQ | TEMP RATING | NOT RATED |
| MATT | MATERIAL | COPPER ALLOY 360 OVERALL |
| ACTA | NUT STYLE | ROUND |
| ACTD | NUT DIAMETER | 0.217 INCHES MINIMUM AND 0.220 INCHES MAXIMUM |
| BZRR | THREAD SERIES | UNC |
| AAJD | THREAD CLASS | 2B |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| ADBG | NUT THICKNESS | 0.625 INCHES NOMINAL |
| CQJX | NOMINAL THREAD SIZE | 0.138 INCHES |
| SFTT | SURFACE TREATMENT | NICKEL OVERALL |