Part Number
Part Number:
NSN:
NIIN:
Item Name:
PLATE , RETAINING , BEARING
Definition:
A COMPARATIVELY FLAT RIGID ITEM, WITH OR WITHOUT A CENTRALLY LOCATED APERTURE, DESIGNED TO HOLD AN ANNULAR BEARING OR A SLEEVE BEARING IN A FITTED INCLOSURE. IT MUST HAVE DRILLED AND/OR TAPPED HOLES FOR MOUNTING PURPOSES. EXCLUDES END BELL, ELECTRICAL ROTATING EQUIPMENT.
CAGE Information
| Code | Company |
|---|---|
| 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
Federal Supply Class
Title
BEARINGS, ANTIFRICTION, UNMOUNTE
Inclusions:
INCLUDES BALL BEARINGS; ROLLER BEARINGS; BALLS; RACES.
Exclusions:
EXCLUDES PLAIN BEARINGS (FSC 3120); JEWEL BEARINGS (FSC 3120)
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ABGL | WIDTH | 1.830 INCHES NOMINAL |
| ADNZ | DISTANCE BETWEEN HOLES ALONG WIDTH | 0.875 INCHES NOMINAL |
| ADFU | MOUNTING HOLE ARRANGEMENT STYLE | FOUR HOLES |
| STYL | STYLE DESIGNATOR | RECTANGLE |
| CKSR | RAISED SURFACE HEIGHT | 0.100 INCHES NOMINAL |
| MATT | MATERIAL | ALUMINUM ALLOY 2024 OVERALL |
| ADUM | OVERALL THICKNESS | 0.210 INCHES NOMINAL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TYPE 2,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE APERTURE |
| SFTT | SURFACE TREATMENT | ANODIZE APERTURE |
| ABRY | LENGTH | 3.250 INCHES NOMINAL |
| FEAT | SPECIAL FEATURES | RECTANGULAR RAISED SURFACE 1.700 IN. L 1.830 IN. WD; RECTANGULAR MILLED SLOT CENTERED ON APERTUR,2.630 IN. L,1.830 IN. WD IN BACKFACE; CHAMFERED CORNERS 0.310 IN. L BY 45.0 DEG |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | RAISED SURFACE W/ APERTURE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-83286 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL EXCLUDING BORE OR APERTURE |
| CWLK | OUTSIDE RAISED SURFACE DIAMETER | 1.700 INCHES NOMINAL |
| CWHW | DISTANCE FROM VERTICAL CENTERLINE TO CENTER OF RIGHT HOLE | 1.250 INCHES NOMINAL |
| ABTB | MOUNTING HOLE DIAMETER | 0.127 INCHES MINIMUM AND 0.133 INCHES MAXIMUM |
| CWJN | DISTANCE FROM HORIZONTAL CENTERLINE TO CENTER OF RIGHT HOLE | 0.438 INCHES NOMINAL |
| SFTT | SURFACE TREATMENT | PLASTIC POLYURETHANE OVERALL EXCLUDING BORE OR APERTURE |
| TEST | TEST DATA DOCUMENT | 81349-MIL-STD-1949 STANDARD |
| ADNY | DISTANCE BETWEEN HOLES ALONG LENGTH | 2.500 INCHES NOMINAL |
| ABVL | APERTURE DIAMETER | 1.280 INCHES MINIMUM AND 1.281 INCHES MAXIMUM |
| CWJW | MOUNTING HOLE TYPE | ROUND, UNTHREADED |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/4 T851 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |