Part Number
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
| Code | Company |
|---|---|
| 03956 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ABHP | OVERALL LENGTH | 1.312 INCHES NOMINAL |
| MATT | MATERIAL | STEEL COMP 303 |
| AAGZ | FIRST END STYLE | CROSS DRILLED HOLE AND INTERNALLY THREADED |
| AMDL | FIRST END DIAMETER | 0.2339 INCHES MINIMUM AND 0.2342 INCHES MAXIMUM |
| ATPC | STEP QUANTITY | 1 |
| AMEB | FIRST END HOLE DEPTH | 0.234 INCHES NOMINAL |
| FEAT | SPECIAL FEATURES | STEP THREADED 0.312-18UNC 3A |
| AMDZ | FIRST END DISTANCE FROM HOLE CENTER TO END | 0.093 INCHES NOMINAL |
| AMDX | FIRST END HOLE DIAMETER | 0.0300 INCHES NOMINAL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE |
| CSPY | LARGEST STEP DIAMETER | 0.312 INCHES NOMINAL |
| AMER | FIRST END INTERNAL THREAD LENGTH | 0.093 INCHES NOMINAL |
| AAHN | END SIMILARITY | IDENTICAL |