Part Number
Definition:
A STRAIGHT SHAFT HAVING TWO OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE OF 1 TO 125 MICROINCHES (O.O25 TO 3.2 MICROMETERS), ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE (S), KEYWAY(S), SPLINES, THREADS, OR HOLES. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. IT MAY BE DRILLED FOR LUBRICATING HOLES. FOR ITEMS HAVING AN INTEGRAL GEAR(S) OR WORM(S), SEE GEARSHAFT (AS MODIFIED). FOR ITEMS DESIGNED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), STRAIGHT. FOR ITEMS NOT HAVING THE ABOVE CONDITIONS SEE PIN, STRAIGHT, HEADLESS. FOR ITEMS HAVING MACHINED ENDS WHICH CONSTITUTE STEPS SEE SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; AND BOLT, FLUID PASSAGE.
CAGE Information
| Code | Company |
|---|---|
| 64104 | DRESSER INC. DIV DRESSER WAUKESHA |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AMDL | FIRST END DIAMETER | 1.4665 INCHES MINIMUM AND 1.4675 INCHES MAXIMUM |
| AMDL | FIRST END DIAMETER | 1.4665 INCHES MINIMUM AND 1.4675 INCHES MAXIMUM |
| CSYM | SURFACE FINISH | 16.0 MICROINCHES |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | TY D-2 HI-RESIST,FSCM 64104 MFR REF SINGLE MATERIAL RESPONSE |
| ABHP | OVERALL LENGTH | 4.562 INCHES NOMINAL |
| AAGZ | FIRST END STYLE | CIRCULAR GROOVED |
| MATT | MATERIAL | STEEL |
| AAHG | FIRST END GROOVE WIDTH | 0.0560 INCHES NOMINAL |
| AAHN | END SIMILARITY | IDENTICAL |
| AAHH | FIRST END GROOVE DIAMETER | 1.3660 INCHES MINIMUM AND 1.3740 INCHES MAXIMUM |
| AMCY | FIRST END DISTANCE FROM END TO GROOVE | 0.094 INCHES NOMINAL |