Part Number
Definition:
A REPLACEABLE DEVICE DESIGNED TO REMOVE SOLID PARTICLES FROM FLUIDS RANGING IN DENSITY FROM HEAVY LIQUIDS TO GASES. THE REMOVAL OF PARTICLES IS ACCOMPLISHED BY POROUS MATERIAL (METALLIC OR NON-METALLIC), STACKED DISKS, WOUND WIRE, OR THE LIKE, CONSTRUCTED SO THE FLUID CAN FLOW THROUGH THE DEVICE WHILE THE SOLID PARTICLES ARE RETAINED. IT MAY BE DESIGNED TO FIT INTO A FILTER, FLUID (OR SIMILAR CAVITY), OR IT MAY HAVE AN INTEGRAL OUTER CASING AND MOUNTING FACILITIES AND BE DESIGNED TO CONNECT DIRECTLY TO AN ENGINE, COMPRESSOR, OR THE LIKE. THE DEGREE OF REMOVAL OF PARTICLES MUST BE NOMINALLY RATED AT LESS THAN 50 MICRONS OR ABSOLUTELY RATED AT LESS THAN 75 MICRONS. EXCLUDES FILTER ELEMENT, AIR CONDITIONING. SEE ALSO STRAINER ELEMENT, SEDIMENT.
CAGE Information
| Code | Company |
|---|---|
| 18350 | PALL AEROPOWER CORPORATION |
Federal Supply Class
Title
AIRCRAFT HYDRAULIC, VACUUM, AND
Inclusions:
INCLUDES HYDRAULIC AND PNEUMATIC ACCUMULATORS, PUMPS, MOTORS, ACTUATING CYLINDERS, AND FILTERS; DE-ICING BOOTS; FLUID TYPE DE-ICING PUMPS, VALVES AND FILTERS; VACUUM SYSTEM OIL SEPARATORS; PNEUMATIC PRESSURIZATION EQUIPMENT OTHER THAN THAT FOR PRESSURIZING CABINS AND COMPARTMENTS.
Exclusions:
EXCLUDES JET ENGINE HYDRAULIC COMPONENTS (FSC 2840); VALVES SPECIFICALLY DESIGNED FOR AIR CONDITIONING, HEATING, VENTILATING, CABIN PRESSURIZING, AND THERMAL DE-ICING (FSC 1660); VALVES SPECIFICALLY DESIGNED FOR USE WITH AIRCRAFT ENGINES (FSC 2840); GUIDED MISSILES AND GUIDED MISSILE ENGINES (FSC 1338), LANDING GEAR (FSC 1620), WHEEL AND BRAKE SYSTEM COMPONENTS (FSC 1630); OXYGEN BREATHING SYSTEM COMPONENTS (FSC 1660); IN-FLIGHT REFUELING SYSTEM HYDRAULIC COMPONENTS (FSC 1680); SPECIFICALLY DESIGNED HYDRAULIC POWER STEERING SYSTEM COMPONENTS (FSC 1620).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| APGF | DESIGN TYPE | NONREUSABLE |
| APGF | DESIGN TYPE | NONREUSABLE |
| ADAS | BODY INSIDE DIAMETER | 0.715 INCHES NOMINAL |
| ABPM | BODY DIAMETER | 1.615 INCHES MINIMUM AND 1.625 INCHES MAXIMUM |
| ADNP | DROP PRESSURE | 10.0 POUNDS PER SQUARE INCH |
| ADNQ | DIFFERENTIAL PRESSURE | 4500.0 POUNDS PER SQUARE INCH |
| STYL | STYLE DESIGNATOR | CYLINDRICAL W/OUT CONTAINER |
| AZKQ | TEMP RATING | -65.0 DEG FAHRENHEIT MINIMUM AND 275.0 DEG FAHRENHEIT MAXIMUM |