Part Number
Part Number:
NSN:
NIIN:
Item Name:
CONNECTING ROD , PISTON
Definition:
A DEVICE USED FOR CONNECTING A PISTON TO A CRANKSHAFT OR TO A MASTER CONNECTING ROD OF AN INTERNAL COMBUSTION ENGINE, STEAM RECIPROCATING ENGINE, RECIPROCATING AIR COMPRESSOR, OR THE LIKE. THE ROD MAY BE CONNECTED DIRECTLY TO THE PISTON, OR IT MAY TRANSMIT THE MOTION THROUGH A CROSSHEAD.
CAGE Information
| Code | Company |
|---|---|
| 35301 | DRESSER INDUSTRIES INC LEROI DIV |
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AETC | METALLIC HARDNESS RATING | NOT RATED |
| AETC | METALLIC HARDNESS RATING | NOT RATED |
| BQCF | SHAFT CONNECTING END EDGE RADIUS | 0.746 INCHES NOMINAL |
| BQCH | SHAFT CONNECTING END THICKNESS | 1.375 INCHES NOMINAL |
| BRNG | CENTER TO CENTER EFFECTIVE LENGTH | 8.750 INCHES NOMINAL |
| BQBT | PISTON CONNECTING END BEARING | NOT INCLUDED |
| BXYS | PISTON END CONNECTION STYLE | CLAMP |
| BQBN | EDGE RADIUS | 0.500 INCHES NOMINAL |
| AQJR | END WIDTH | 1.330 INCHES NOMINAL |
| BQCG | SHAFT CONNECTING END WIDTH | 2.813 INCHES NOMINAL |
| MATL | MATERIAL | STEEL |
| AKEU | SHAFT CONNECTING END STYLE | AUTOMOTIVE STANDARD SPLIT BEARING 2 BOLT |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | I-SECTION TYPE |
| BQCY | SHAFT CONNECTING END BEARING REPLACEABILITY | REPLACEABLE |
| BQBY | PISTON CONNECTING END LUBRICATION DRILL FEATURE | NOT INCLUDED |
| BQCB | SHAFT CONNECTING END BEARING | INCLUDED |
| BQCZ | SHAFT CONNECTING END LUBRICATION DRILL FEATURE | INCLUDED |
| AXPW | END THICKNESS | 0.625 INCHES NOMINAL |
| BQCC | SHAFT CONNECTING END HOLE INSIDE DIAMETER | 1.500 INCHES NOMINAL |
| AWQD | STRENGTH RATING | NOT RATED |
| AARN | FABRICATION METHOD | CAST |
| BQBZ | PISTON CONNECTING END LUBRICATION METHOD | SPLASH |
| BQBP | END HOLE INSIDE DIAMETER | 0.750 INCHES NOMINAL |
| BRNK | BODY THICKNESS AT PISTON CONNECTING END | 0.625 INCHES NOMINAL |
| BQDB | SHAFT CONNECTING END LUBRICATION METHOD | SPLASH |
| BRNH | BODY WIDTH AT PISTON CONNECTING END | 0.760 INCHES NOMINAL |
| BRNJ | BODY WIDTH AT SHAFT CONNECTING END | 1.000 INCHES NOMINAL |
| BRNL | BODY THICKNESS AT SHAFT CONNECTING END | 0.750 INCHES NOMINAL |