Part Number
Definition:
A REPLACEABLE DEVICE DESIGNED TO REMOVE SOLID PARTICLES FROM FLUIDS RANGING IN DENSITY FROM HEAVY LIQUIDS TO GASES. THE REMOVAL OF PARTICLES IS ACCOMPLISHED BY POROUS MATERIAL (METALLIC OR NON-METALLIC), STACKED DISKS, WOUND WIRE, OR THE LIKE, CONSTRUCTED SO THE FLUID CAN FLOW THROUGH THE DEVICE WHILE THE SOLID PARTICLES ARE RETAINED. IT MAY BE DESIGNED TO FIT INTO A FILTER, FLUID (OR SIMILAR CAVITY), OR IT MAY HAVE AN INTEGRAL OUTER CASING AND MOUNTING FACILITIES AND BE DESIGNED TO CONNECT DIRECTLY TO AN ENGINE, COMPRESSOR, OR THE LIKE. THE DEGREE OF REMOVAL OF PARTICLES MUST BE NOMINALLY RATED AT LESS THAN 50 MICRONS OR ABSOLUTELY RATED AT LESS THAN 75 MICRONS. EXCLUDES FILTER ELEMENT, AIR CONDITIONING. SEE ALSO STRAINER ELEMENT, SEDIMENT.
CAGE Information
| Code | Company |
|---|---|
| 06816 | PALL CORPORATION DBA PALL ADVNCED SP |
Federal Supply Class
Title
CENTRIFUGALS, SEPARATORS, AND PR
Inclusions:
Exclusions:
EXCLUDES LABORATORY CENTRIFUGES (FSG 65 AND 66); WATER PURIFICATION FILTERS (FSC 4610).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| APGF | DESIGN TYPE | NONREUSABLE |
| MATT | MATERIAL | FIBER SYNTHETIC FILTERING MEDIUM AND RESIN SYNTHETIC FILTERING MEDIUM |
| ADNK | FLOW DIRECTION | OUTSIDE IN |
| ADAS | BODY INSIDE DIAMETER | 1.670 INCHES NOMINAL |
| AZKQ | TEMP RATING | -45.0 DEG FAHRENHEIT MINIMUM AND 225.0 DEG FAHRENHEIT MAXIMUM |
| CXZX | FILTERING SYSTEM FOR WHICH DESIGNED | FULL FLOW |
| ADNQ | DIFFERENTIAL PRESSURE | 150.0 POUNDS PER SQUARE INCH |
| MATT | MATERIAL | RUBBER BUNA N SEAL |
| ADNP | DROP PRESSURE | 2.6 POUNDS PER SQUARE INCH |
| AZTL | BODY OVERALL LENGTH | 8.000 INCHES NOMINAL |
| MEDA | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON |
| STYL | STYLE DESIGNATOR | CYLINDRICAL W/OUT CONTAINER |
| ADNH | FILTRATION RATING IN MICRONS | 25.0 ABSOLUTE AND 10.0 NOMINAL |
| FEAT | SPECIAL FEATURES | CRES END CAPS AND CORE |
| CRXW | FILTERING MEDIA DESIGN | PLEATED SINGLE FILTERING MEDIA RESPONSE |
| ABPM | BODY DIAMETER | 3.125 INCHES NOMINAL |