Part Number
Definition:
A REPLACEABLE DEVICE DESIGNED TO REMOVE SOLID PARTICLES FROM FLUIDS RANGING IN DENSITY FROM HEAVY LIQUIDS TO GASES. THE REMOVAL OF PARTICLES IS ACCOMPLISHED BY POROUS MATERIAL (METALLIC OR NON-METALLIC), STACKED DISKS, WOUND WIRE, OR THE LIKE, CONSTRUCTED SO THE FLUID CAN FLOW THROUGH THE DEVICE WHILE THE SOLID PARTICLES ARE RETAINED. IT MAY BE DESIGNED TO FIT INTO A FILTER, FLUID (OR SIMILAR CAVITY), OR IT MAY HAVE AN INTEGRAL OUTER CASING AND MOUNTING FACILITIES AND BE DESIGNED TO CONNECT DIRECTLY TO AN ENGINE, COMPRESSOR, OR THE LIKE. THE DEGREE OF REMOVAL OF PARTICLES MUST BE NOMINALLY RATED AT LESS THAN 50 MICRONS OR ABSOLUTELY RATED AT LESS THAN 75 MICRONS. EXCLUDES FILTER ELEMENT, AIR CONDITIONING. SEE ALSO STRAINER ELEMENT, SEDIMENT.
CAGE Information
| Code | Company |
|---|---|
| 60047 | PALL AEROPOWER CORP SUB OF PALL CORP |
Federal Supply Class
Title
CENTRIFUGALS, SEPARATORS, AND PR
Inclusions:
Exclusions:
EXCLUDES LABORATORY CENTRIFUGES (FSG 65 AND 66); WATER PURIFICATION FILTERS (FSC 4610).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ADNK | FLOW DIRECTION | OUTSIDE IN |
| ADNK | FLOW DIRECTION | OUTSIDE IN |
| ADNP | DROP PRESSURE | NOT RATED |
| ABPM | BODY DIAMETER | 2.750 INCHES NOMINAL |
| CRXW | FILTERING MEDIA DESIGN | MESH SINGLE FILTERING MEDIA RESPONSE |
| MATT | MATERIAL | STEEL CORROSION RESISTING FILTERING MEDIUM |
| APGF | DESIGN TYPE | LIMITED |
| ADNH | FILTRATION RATING IN MICRONS | NOT RATED |
| AZTL | BODY OVERALL LENGTH | 9.625 INCHES NOMINAL |
| STYL | STYLE DESIGNATOR | CYLINDRICAL W/OUT CONTAINER |
| AZKQ | TEMP RATING | 454.0 DEG FAHRENHEIT MINIMUM AND 600.0 DEG FAHRENHEIT MAXIMUM |
| FEAT | SPECIAL FEATURES | STAINLESS STEEL END CAPS |
| ADNQ | DIFFERENTIAL PRESSURE | 125.0 POUNDS PER SQUARE INCH |
| ADAS | BODY INSIDE DIAMETER | 1.000 INCHES NOMINAL |
| MEDA | MEDIA FOR WHICH DESIGNED | ANY ACCEPTABLE |