Part Number
Part Number:
NSN:
NIIN:
Item Name:
HOSE ASSEMBLY , NONMETALLIC
Definition:
A LENGTH OF NONMETALLIC HOSE WITH FITTINGS ON ONE OR BOTH ENDS. FOR ITEMS WITHOUT FITTINGS, SEE HOSE, NONMETALLIC. EXCLUDES HOSE ASSEMBLY, AIR DUCT; AND HOSE ASSEMBLY, AIR DUCT, AIR BREATHING.
CAGE Information
| Code | Company |
|---|---|
| 00624 | EATON CORPORATION DBA AEROSPACE DIV |
Federal Supply Class
Title
HOSE AND FLEXIBLE TUBING
Inclusions:
INCLUDES AIR DUCT, METALLIC, NONMETALLIC, AND TEXTILE FIBER HOSES AND THEIR ASSEMBLIES; FLEXIBLE TUBING AND THEIR ASSEMBLIES.
Exclusions:
EXCLUDES CONDUIT AND THEIR ASSEMBLIES (FSC 5975); LABORATORY TUBES (FSC 6640); MEDICAL AND SURGICAL TUBES (FSC 6515); RIGID TUBING AND THEIR ASSEMBLIES (FSC 4710).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CBBL | FEATURES PROVIDED | NUTS DRILLED FOR LOCKWIRE |
| ADLF | HOSE OR TUBING SPEC/STD DATA | MIL-H-27267,SIZE 4 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| ADLH | SECOND END FITTING SPEC/STD DATA | MS33656-6 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| AHNC | CONNECTION STYLE | SWIVEL NUT FLARE 2ND END |
| CQJX | NOMINAL THREAD SIZE | 0.562 INCHES 2ND END |
| THSD | THREAD SERIES DESIGNATOR | UNJF 1ST END |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CQRB | SEAT ANGLE | 37.0 DEGREES 1ST END |
| CRBL | SECOND END FITTING/COMPONENT AND MATERIAL | COMPLETE FITTING STEEL, CORROSION RESISTING |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 2.000 INCHES |
| AARX | INSIDE DIAMETER | 0.188 INCHES NOMINAL |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | OIL RESISTANT AND SOLVENT RESISTANT AND FUEL RESISTANT AND ALCOHOL RESISTANT AND ACID RESISTANT AND ETHYLENE GLYCOL RESISTANT AND SOLVENT RESISTANT |
| THSD | THREAD SERIES DESIGNATOR | UNJF 2ND END |
| CQRB | SEAT ANGLE | 37.0 DEGREES 2ND END |
| ADJM | INNER CONVEYING TUBE MATERIAL | PLASTIC, POLYTETRAFLUOROETHYLENE |
| CQBG | FIRST END SWIVEL ACTION CAPABILITY | NOT INCLUDED |
| CQBD | BURST TEST PRESSURE | 12000.0 POUNDS PER SQUARE INCH |
| CQJX | NOMINAL THREAD SIZE | 0.438 INCHES 1ST END |
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END |
| AGAV | END ITEM IDENTIFICATION | MCDONNELL DOUGLAS F15E AIRCRAFT |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 2ND END |
| AAJD | THREAD CLASS | 3B 1ST END |
| CQGM | MAXIMUM OPERATING PRESSURE | 1500.0 POUNDS PER SQUARE INCH |
| CRDW | HYDROSTATIC TEST PRESSURE | 3000.0 POUNDS PER SQUARE INCH |
| CRXX | MEASURING METHOD AND LENGTH | 7.000 INCHES NOMINAL OVERALL |
| CQCS | LAYER COMPOSITION AND LOCATION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| CQQN | EXTERNAL PROTECTION TYPE AND LOCATION | OVERALL CHAFE GUARD, HEAT SHRINKABLE POLOLEFIN TUBING |
| AAJD | THREAD CLASS | 3B 2ND END |
| AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END |
| AKUU | END CONNECTION DESIGN | STRAIGHT 2ND END |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| AAJF | THREAD DIRECTION | RIGHT-HAND 2ND END |
| CRZY | SECOND END SWIVEL ACTION CAPABILITY | NOT INCLUDED |
| ABKV | OUTSIDE DIAMETER | 0.312 INCHES NOMINAL |
| ADLG | FIRST END FITTING SPEC/STD DATA | MS27267 SIZE 4 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| ABJH | TEMP RATING | -65.0 DEG FAHRENHEIT SINGLE RESPONSE AND 450.0 DEG FAHRENHEIT SINGLE RESPONSE |
| CQGH | FIRST END FITTING/COMPONENT AND MATERIAL | COMPLETE FITTING STEEL, CORROSION RESISTING |
| AHNC | CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |