Part Number
Part Number:
NSN:
NIIN:
Item Name:
HOLDER , GEAR
CAGE Information
| Code | Company |
|---|---|
| 99167 | HAMILTON SUNDSTRAND CORPORATION |
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| FTLD | FUNCTIONAL DESCRIPTION | THE AGE10261 GEAR HOLDER HOLDS THE SPUR GEAR WHILE APPLYING TORQUE TO THE SCAVENGE PUMP ROTOR |
| FEAT | SPECIAL FEATURES | DURING DEPOT MAINTENANCE OF THE CONSTANT SPEED DRIVE,IT WILL BE NECESSARY TO INSTALL AND REMOVE INTERNAL COMPONENTS IN THE CENTER HOUSING; A METHOD IS REQUIRED TO INSTALL AND HOLD THE SPUR GEAR ON THE SCAVEGE PUMP ASSEMBLYWHILE APPLYING A TORQUE OF 40 TO 50 INCH-POUNDS |
| TEXT | GENERAL CHARACTERISTICS ITEM DESCRIPTION | MATERIAL: BLACK OXIDE FINISHED STEEL; DIMENSIONS: 6 FT LONG X 2 INCH BY1 INCH HEIGHT (APPROC); WEIGHT: 2 POUNDS (APPROX) |
| ZZZV | FSC APPLICATION DATA | THE GEAR HOLDER CONSISTS OF A 3-3/4 INCH LONG BY 1/2 INCH DIAMETER HANDLE ATTACHED TO A 1-3/4 BY 1-1/4 BY 5/8INCH TORQUE HEAD; THE TORQUE HEAD HAS 3 DOWEL PINS LOCATED 120 DEGREES APARTTHAT FIT BETWEEN THE TEETH OF THE SPURGEAR AND A .500 INCH DIAMETER HOLE THAT ALLOWS PASSAGE TO THE PUMP ROTOR WRENCHING FLATS |
| AGAV | END ITEM IDENTIFICATION | THE F-15E INTEGATED DRIVE GENERATOR THAT IS MOUNTED ON EACH OF TWO AIRFRAME MOUNTED ACCESSORY DRIVE GEARBOXES |