Part Number
Definition:
A HIGH STRENGTH, 160,000 POUNDS PER SQUARE INCH (1100 MEGAPASCALS) MINIMUM TENSILE STRENGTH EXTERNALLY THREADED FASTENER DESIGNED FOR USE IN APPLICATIONS INVOLVING GREAT SHEAR STRESS. THE HEAD IS DESIGNED TO ACCOMMODATE AN EXTERNAL WRENCH OR DRIVER. THE HEAD IS NOT DESIGNED TO BE HELD OR DRIVEN WITH AN INSERTED DRIVER, NOR IS IT DESIGNED FOR ROTATION BY THE THUMB AND FINGERS. THE UNTHREADED PORTION IS OF SPECIFIC GRIP LENGTH, PLATED OR UNPLATED, AND IS MACHINED TO A TOLERANCE OF ONE THOUSANDTH (0.001) OF AN INCH (0.025 MM) OR LESS OF A SPECIFIC DIAMETER FOR ITEMS ONE INCH (25 MM) OR LESS IN DIAMETER. ITEMS OVER ONE INCH (25 MM) IN DIAMETER SHALL HAVE A TOLERANCE OF FIFTEEN TEN THOUSANDTHS (0.0015) OF AN INCH (0.038 MM) OR LESS. THE NOMINAL MAJOR DIAMETER OF THE THREADS SHALL BE AT LEAST ONE THOUSANDTH (0.001) OF AN INCH (0.025 MM) BELOW THE MINIMUM SHANK DIAMETER, BUT NOT BELOW THE MINIMUM MAJOR DIAMETER FOR APPLICABLE CLASS OF FIT, AS SHOWN IN THE SCREW THREAD STANDARDS, FED STD H28 AND/OR OTHER NATIONALLY RECOGNIZED STANDARDS. A LOCKING FEATURE MAY BE INCORPORATED IN THE DESIGN OF THE HEAD OR THREADS. SEE BOLT, MACHINE AND BOLT, CLEVIS.
CAGE Information
| Code | Company |
|---|---|
| 06725 | SPS TECHNOLOGIES LLC DBA AIR INDUSTR |
Federal Supply Class
Title
BOLTS
Inclusions:
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AATC | EXTENDED WASHER DIAMETER | 0.465 INCHES MINIMUM AND 0.475 INCHES MAXIMUM |
| CRHC | HOLE CONFIGURATION STYLE | ROUND LONGITUDINAL HOLE |
| AAUB | HOLE DIAMETER | 0.037 INCHES NOMINAL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6485 ASSN STD SINGLE MATERIAL RESPONSE OVERALL OR AMS6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| ZZZK | SPECIFICATION/STANDARD DATA | 56878-EWB26 MANUFACTURERS STANDARD |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| CQFM | HARDNESS RATING | 51.0 ROCKWELL C MINIMUM OVERALL AND 54.0 ROCKWELL C MAXIMUM OVERALL |
| CQBC | MINIMUM TENSILE STRENGTH | 260000 POUNDS PER SQUARE INCH |
| AAJD | THREAD CLASS | 3A |
| AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| AASU | HEAD HEIGHT | 0.254 INCHES NOMINAL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-8837 TYPE 1 CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ANEE | GRIP LENGTH | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| AASA | THREAD LENGTH | 0.506 INCHES MINIMUM AND 0.556 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM |
| ASXK | HOLE QUANTITY | 4 |
| AATB | WIDTH BETWEEN FLATS | 0.304 INCHES MINIMUM AND 0.313 INCHES MAXIMUM |
| BQDM | HOLE TYPE | DRILLED |
| MATT | MATERIAL | STEEL COMP H11 OVERALL |
| AATD | EXTENDED WASHER THICKNESS | 0.042 INCHES NOMINAL |
| AGAV | END ITEM IDENTIFICATION | AIRCRAFT, F-111 (FMS ONLY);HELICOPTER, CHINOOK, CH-47 |
| AASB | FASTENER LENGTH | 1.016 INCHES MINIMUM AND 1.046 INCHES MAXIMUM |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL |
| AASK | HEAD STYLE | DOUBLE HEXAGON W/HOLE |