Part Number
Part Number:
NSN:
NIIN:
Item Name:
BOLT , CLOSE TOLERANCE
Definition:
AN EXTERNALLY THREADED FASTENER WHOSE UNTHREADED PORTION IS OF A SPECIFIED GRIP LENGTH, PLATED OR UNPLATED, AND IS MACHINED TO A TOLERANCE OF ONE THOUSANDTH (0.001) OF AN INCH (0.025 MM) OR LESS OF A SPECIFIC DIAMETER FOR ITEMS ONE INCH (25 MM) OR LESS IN DIAMETER. ITEMS OVER ONE INCH (25 MM) IN DIAMETER SHALL HAVE A TOLERANCE OF FIFTEEN TEN-THOUSANDTHS (0.0015) OF AN INCH (0.038 MM) OR LESS. THE NOMINAL MAJOR DIAMETER OF THE THREADS SHALL BE AT LEAST ONE THOUSANDTH (0.001) OF AN INCH (0.025 MM) BELOW THE MINIMUM SHANK DIAMETER, BUT NOT BELOW THE MINIMUM MAJOR DIAMETER FOR APPLICABLE CLASS OF FIT, AS SHOWN IN THE SCREW THREAD STANDARDS, FED STD H28 AND/OR OTHER NATIONALLY RECOGNIZED STANDARDS. THE HEAD IS NOT DESIGNED TO BE HELD OR DRIVEN WITH AN INSERTED DRIVER, NOR IS IT DESIGNED FOR ROTATION BY THE THUMB AND FINGERS. A LOCKING FEATURE MAY BE INCORPORATED IN THE DESIGN OF THE HEAD OR THREADS. FOR ITEMS HAVING CLOSE TOLERANCE, AND FABRICATED FROM MATERIAL HAVING 160,000 POUNDS PER SQUARE INCH (1100 MEGAPASCALS) MINIMUM TENSILE STRENGTH, SEE BOLT, SHEAR. FOR ITEMS FABRICATED FROM MATERIAL HAVING LESS THAN 160,000 POUNDS PER SQUARE INCH (1100 MEGAPASCALS) MINIMUM TENSILE STRENGTH AND NOT HAVING A CLOSE TOLERANCE, SEE BOLT, MACHINE.
CAGE Information
| Code |
Company |
| 06725 |
SPS TECHNOLOGIES LLC DBA AIR INDUSTR |
Characteristics (Decoded)
| MRC |
Requirements Statement |
Clear Text Reply |
| ANEE |
GRIP LENGTH |
0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM |
| AASA |
THREAD LENGTH |
0.323 INCHES NOMINAL |
| AHYM |
NOMINAL THREAD DIAMETER |
0.1900 INCHES |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF |
| AGAV |
END ITEM IDENTIFICATION |
PACER DAWN |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
NAS 672 NATIONAL SPEC SINGLE TREATMENT RESPONSE THREADS |
| FEAT |
SPECIAL FEATURES |
DRY FILM LUBE ON BEARING SURFACE OF HEAD AND GRIP AREA ONLY |
| AASK |
HEAD STYLE |
SPLINE DRIVE SHEAR HEAD |
| AAJD |
THREAD CLASS |
3A |
| AAZH |
HEAD MINOR DIAMETER |
0.456 INCHES NOMINAL |
| AAUR |
GRIP DIAMETER |
0.1884 INCHES MINIMUM AND 0.1894 INCHES MAXIMUM |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| SFTT |
SURFACE TREATMENT |
CADMIUM THREADS |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS-6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| AASB |
FASTENER LENGTH |
0.620 INCHES MINIMUM AND 0.650 INCHES MAXIMUM |
| AASU |
HEAD HEIGHT |
0.140 INCHES NOMINAL |
| MATT |
MATERIAL |
STEEL COMP H11 OVERALL |
| CMLP |
THREAD QUANTITY PER INCH |
32 |
Similar Parts