Part Number
Definition:
A HIGH STRENGTH, 160,000 POUNDS PER SQUARE INCH (1100 MEGAPASCALS) MINIMUM TENSILE STRENGTH EXTERNALLY THREADED FASTENER DESIGNED FOR USE IN APPLICATIONS INVOLVING GREAT SHEAR STRESS. THE HEAD IS DESIGNED TO ACCOMMODATE AN EXTERNAL WRENCH OR DRIVER. THE HEAD IS NOT DESIGNED TO BE HELD OR DRIVEN WITH AN INSERTED DRIVER, NOR IS IT DESIGNED FOR ROTATION BY THE THUMB AND FINGERS. THE UNTHREADED PORTION IS OF SPECIFIC GRIP LENGTH, PLATED OR UNPLATED, AND IS MACHINED TO A TOLERANCE OF ONE THOUSANDTH (0.001) OF AN INCH (0.025 MM) OR LESS OF A SPECIFIC DIAMETER FOR ITEMS ONE INCH (25 MM) OR LESS IN DIAMETER. ITEMS OVER ONE INCH (25 MM) IN DIAMETER SHALL HAVE A TOLERANCE OF FIFTEEN TEN THOUSANDTHS (0.0015) OF AN INCH (0.038 MM) OR LESS. THE NOMINAL MAJOR DIAMETER OF THE THREADS SHALL BE AT LEAST ONE THOUSANDTH (0.001) OF AN INCH (0.025 MM) BELOW THE MINIMUM SHANK DIAMETER, BUT NOT BELOW THE MINIMUM MAJOR DIAMETER FOR APPLICABLE CLASS OF FIT, AS SHOWN IN THE SCREW THREAD STANDARDS, FED STD H28 AND/OR OTHER NATIONALLY RECOGNIZED STANDARDS. A LOCKING FEATURE MAY BE INCORPORATED IN THE DESIGN OF THE HEAD OR THREADS. SEE BOLT, MACHINE AND BOLT, CLEVIS.
CAGE Information
| Code | Company |
|---|---|
| 06725 | SPS TECHNOLOGIES LLC DBA AIR INDUSTR |
Federal Supply Class
Title
BOLTS
Inclusions:
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CSYM | SURFACE FINISH | 32.0 MICROINCHES GRIP |
| AASB | FASTENER LENGTH | 1.635 INCHES MINIMUM AND 1.665 INCHES MAXIMUM |
| CQBC | MINIMUM TENSILE STRENGTH | 180000 POUNDS PER SQUARE INCH |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| AATC | EXTENDED WASHER DIAMETER | 0.807 INCHES MINIMUM AND 0.817 INCHES MAXIMUM |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD |
| AAZH | HEAD MINOR DIAMETER | 0.673 INCHES MINIMUM AND 0.688 INCHES MAXIMUM |
| AASA | THREAD LENGTH | 0.545 INCHES MAXIMUM |
| AAJD | THREAD CLASS | 3A |
| AASK | HEAD STYLE | SPLINE EXTENDED WASHER |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAUR | GRIP DIAMETER | 0.4360 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM |
| AHYM | NOMINAL THREAD DIAMETER | 0.437 INCHES |
| AASU | HEAD HEIGHT | 0.393 INCHES NOMINAL |
| ANEE | GRIP LENGTH | 1.115 INCHES MINIMUM AND 1.135 INCHES MAXIMUM |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| MATT | MATERIAL | NICKEL ALLOY 718 OVERALL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| AATD | EXTENDED WASHER THICKNESS | 0.063 INCHES NOMINAL |