Part Number
Definition:
AN EXTERNALLY THREADED FASTENER WHOSE UNTHREADED PORTION IS OF A SPECIFIED GRIP LENGTH, PLATED OR UNPLATED, AND IS MACHINED TO A TOLERANCE OF ONE THOUSANDTH (0.001) OF AN INCH (0.025 MM) OR LESS OF A SPECIFIC DIAMETER FOR ITEMS ONE INCH (25 MM) OR LESS IN DIAMETER. ITEMS OVER ONE INCH (25 MM) IN DIAMETER SHALL HAVE A TOLERANCE OF FIFTEEN TEN-THOUSANDTHS (0.0015) OF AN INCH (0.038 MM) OR LESS. THE NOMINAL MAJOR DIAMETER OF THE THREADS SHALL BE AT LEAST ONE THOUSANDTH (0.001) OF AN INCH (0.025 MM) BELOW THE MINIMUM SHANK DIAMETER, BUT NOT BELOW THE MINIMUM MAJOR DIAMETER FOR APPLICABLE CLASS OF FIT, AS SHOWN IN THE SCREW THREAD STANDARDS, FED STD H28 AND/OR OTHER NATIONALLY RECOGNIZED STANDARDS. THE HEAD IS NOT DESIGNED TO BE HELD OR DRIVEN WITH AN INSERTED DRIVER, NOR IS IT DESIGNED FOR ROTATION BY THE THUMB AND FINGERS. A LOCKING FEATURE MAY BE INCORPORATED IN THE DESIGN OF THE HEAD OR THREADS. FOR ITEMS HAVING CLOSE TOLERANCE, AND FABRICATED FROM MATERIAL HAVING 160,000 POUNDS PER SQUARE INCH (1100 MEGAPASCALS) MINIMUM TENSILE STRENGTH, SEE BOLT, SHEAR. FOR ITEMS FABRICATED FROM MATERIAL HAVING LESS THAN 160,000 POUNDS PER SQUARE INCH (1100 MEGAPASCALS) MINIMUM TENSILE STRENGTH AND NOT HAVING A CLOSE TOLERANCE, SEE BOLT, MACHINE.
CAGE Information
| Code | Company |
|---|---|
| 17943 | FEDERAL MANUFACTURING CORPORATION |
Federal Supply Class
Title
BOLTS
Inclusions:
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CQQR | THREAD PITCH IN MILLIMETERS | 1.5 |
| CSYM | SURFACE FINISH | 3.2 MICROMETERS BEARING SURFACE OF HEAD |
| AHYM | NOMINAL THREAD DIAMETER | 10.0 MILLIMETERS |
| CSYM | SURFACE FINISH | 3.2 MICROMETERS GRIP |
| CSYM | SURFACE FINISH | 3.2 MICROMETERS THREADS |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| MATT | MATERIAL | IRON ALLOY 660 OVERALL |
| CQWR | EXTERNAL THREAD TOLERANCE CLASS | 6G |
| AAUR | GRIP DIAMETER | 9.985 MILLIMETERS MINIMUM AND 10.000 MILLIMETERS MAXIMUM |
| AASK | HEAD STYLE | HEXAGON |
| AASA | THREAD LENGTH | 22.0 MILLIMETERS MINIMUM |
| AASU | HEAD HEIGHT | 6.82 MILLIMETERS MINIMUM AND 7.18 MILLIMETERS MAXIMUM |
| ANEE | GRIP LENGTH | 9.75 MILLIMETERS MINIMUM AND 10.00 MILLIMETERS MAXIMUM |
| AATB | WIDTH BETWEEN FLATS | 16.73 MILLIMETERS MINIMUM AND 17.00 MILLIMETERS MAXIMUM |
| THSD | THREAD SERIES DESIGNATOR | M |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5732 ASSN STD SINGLE MATERIAL RESPONSE OVERALL OR AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| AASB | FASTENER LENGTH | 29.5 MILLIMETERS MINIMUM AND 34.5 MILLIMETERS MAXIMUM |