Part Number
Part Number:
NSN:
NIIN:
Item Name:
NUT , SELF-LOCKING , ROUND
Definition:
A NUT, CIRCULAR IN SHAPE, WHICH MAY HAVE WRENCHING FACILITIES SUCH AS FLATS, HOLES, PROTUSIONS, SLOTS OR SPLINES IN OR ON THE PERIPHERY OR IN THE FACE OPPOSITE THE BEARING SURFACE. AN INTEGRAL FEATURE IS INCORPORATED FOR LOCKING ON THE THREADS OF A MATING MEMBER. DO NOT USE IF A MORE SPECIFIC ITEM NAME APPLIES. EXCLUDES COLLAR, PIN-RIVET, THREADED; INSERT, SCREW THREAD; NUT (1), SLEEVE; NUT(1), PLAIN, CAP; AND TURNBUCKLE BODY.
CAGE Information
| Code | Company |
|---|---|
| 019L2 | MAC LEAN-FOGG COMPANY DBA MAC LEAN-E |
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ACTD | NUT DIAMETER | 8.0900 INCHES MINIMUM AND 8.1100 INCHES MAXIMUM |
| BZRR | THREAD SERIES | UNS |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | NLON ZYTEL-103 FSCM 77272 MFR REF 2ND MATERIAL RESPONSE LOCKING INSERT |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-P-16232,TY Z,CL 4A MIL SPEC SINGLE TREATMENT RESPONSE NUT |
| ABQU | DRIVE POINT DEPTH | 0.120 NOMINAL MILS AND 0.130 NOMINAL CENTIMETERS |
| AZKQ | TEMP RATING | -75.0 DEG FAHRENHEIT MINIMUM AND 250.0 DEG FAHRENHEIT MAXIMUM |
| MATT | MATERIAL | PLASTIC POLYAMIDE LOCKING INSERT |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ZZZK | SPECIFICATION/STANDARD DATA | 81205-BACN10GR MANUFACTURERS STANDARD |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758,COND F MIL SPEC 1ST MATERIAL RESPONSE NUT |
| AAUM | LOCKING FEATURE | PREVAILING TORQUE WITH NONMETALLIC INSERT |
| ADBM | DRIVE POINT QUANTITY | 4 |
| AAJD | THREAD CLASS | 3B |
| CQJX | NOMINAL THREAD SIZE | 7.066 INCHES |
| CQFM | HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM |
| CRSQ | COUNTERSINK ANGLE | 90.0 DEGREES MINIMUM NUT AND 110.0 DEGREES MAXIMUM NUT |
| CMLP | THREAD QUANTITY PER INCH | 16 |
| ADBH | DRIVE POINT WIDTH | 0.4840 NOMINAL MILS AND 0.5160 NOMINAL CENTIMETERS |
| ACTA | NUT STYLE | ROUND |
| MATT | MATERIAL | STEEL COMP 4130 NUT |
| SFTT | SURFACE TREATMENT | PHOSPHATE ZINC NUT |
| ADBG | NUT THICKNESS | 0.4910 INCHES MINIMUM AND 0.5210 INCHES MAXIMUM |
| ADBJ | UNDERCUT THICKNESS | 0.0740 NOMINAL MILS AND 0.0760 NOMINAL CENTIMETERS |