Part Number
Part Number:
NSN:
NIIN:
Item Name:
SHAFT , AXLE , AUTOMOTIVE
Definition:
A SHAFT WHICH IS A COMPONENT OF AXLE ASSEMBLY, AUTOMOTIVE, DRIVING, USED TO TRANSMIT ROTARY MOTION FROM THE DIFFERENTIAL ASSEMBLY EITHER DIRECTLY OR INDIRECTLY TO THE WHEEL HUBS. EXCLUDES SHAFTS WITH A UNIVERSAL JOINT OR A COMPONENT OF A UNIVERSAL JOINT ATTACHED TO IT.
CAGE Information
| Code | Company |
|---|---|
| 57526 | FORD MOTOR CO |
Federal Supply Class
Title
VEHICULAR POWER TRANSMISSION COM
Inclusions:
INCLUDES TRANSFER TRANSMISSION ASSEMBLIES; CLUTCH ASSEMBLIES; UNIVERSAL JOINTS; PROPELLER SHAFTS; AUTOMOTIVE TORQUE CONVERTERS; POWER TAKEOFFS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| BNYT | FLANGE THICKNESS AT MOUNTING HOLE | 0.406 INCHES NOMINAL |
| BNYT | FLANGE THICKNESS AT MOUNTING HOLE | 0.406 INCHES NOMINAL |
| BNYS | FLANGE OVERALL THICKNESS | 0.500 INCHES NOMINAL |
| AMGC | SECOND END SPLINE MAJOR DIAMETER | 1.975 INCHES MINIMUM AND 1.980 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 41.281 INCHES MINIMUM AND 41.406 INCHES MAXIMUM |
| AMGB | SECOND END SPLINE MINOR DIAMETER | 1.830 INCHES MINIMUM AND 1.840 INCHES MAXIMUM |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 12 TAPERED HOLE |
| ABQB | TAPER MAJOR DIAMETER | 0.783 INCHES NOMINAL |
| AMGA | SECOND END SPLINE LENGTH | 3.719 INCHES MINIMUM AND 3.781 INCHES MAXIMUM |
| AHTC | FLANGE OUTSIDE DIAMETER | 6.123 INCHES MINIMUM AND 6.127 INCHES MAXIMUM |
| BNTF | FIRST END BEARING SEAT | NOT INCLUDED |
| AMQF | SECOND END TYPE | SPLINED |
| AMQA | FIRST END TYPE | FLANGED |
| BNTT | SECOND END BEARING SEAT | NOT INCLUDED |
| BBCF | SECOND END SPLINE QUANTITY | 16 |
| AETC | METALLIC HARDNESS RATING | 38.0 MINIMUM ROCKWELL C AND 48.0 MAXIMUM ROCKWELL C |
| BNYW | FLANGE HOLE TAPER | 8.500 INCHES PER SQUARE INCH BLANK |
| BNTM | SECOND END SPLINE TYPE | STRAIGHT |
| MATL | MATERIAL | STEEL, AISI 4150H |