Part Number
Definition:
A REPLACEABLE DEVICE DESIGNED TO REMOVE SOLID PARTICLES FROM FLUIDS RANGING IN DENSITY FROM HEAVY LIQUIDS TO GASES. THE REMOVAL OF PARTICLES IS ACCOMPLISHED BY POROUS MATERIAL (METALLIC OR NON-METALLIC), STACKED DISKS, WOUND WIRE, OR THE LIKE, CONSTRUCTED SO THE FLUID CAN FLOW THROUGH THE DEVICE WHILE THE SOLID PARTICLES ARE RETAINED. IT MAY BE DESIGNED TO FIT INTO A FILTER, FLUID (OR SIMILAR CAVITY), OR IT MAY HAVE AN INTEGRAL OUTER CASING AND MOUNTING FACILITIES AND BE DESIGNED TO CONNECT DIRECTLY TO AN ENGINE, COMPRESSOR, OR THE LIKE. THE DEGREE OF REMOVAL OF PARTICLES MUST BE NOMINALLY RATED AT LESS THAN 50 MICRONS OR ABSOLUTELY RATED AT LESS THAN 75 MICRONS. EXCLUDES FILTER ELEMENT, AIR CONDITIONING. SEE ALSO STRAINER ELEMENT, SEDIMENT.
CAGE Information
| Code | Company |
|---|---|
| 73370 | HONEYWELL INTERNATIONAL INC DBA HONE |
Federal Supply Class
Title
CENTRIFUGALS, SEPARATORS, AND PR
Inclusions:
Exclusions:
EXCLUDES LABORATORY CENTRIFUGES (FSG 65 AND 66); WATER PURIFICATION FILTERS (FSC 4610).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| APGF | DESIGN TYPE | NONREUSABLE |
| APGF | DESIGN TYPE | NONREUSABLE |
| ADNH | FILTRATION RATING IN MICRONS | 25.0 NOMINAL |
| ADNK | FLOW DIRECTION | OUTSIDE IN |
| MATT | MATERIAL | ANY ACCEPTABLE SEAL |
| MATT | MATERIAL | PLASTIC FILTERING MEDIUM OR CELLULOSE FILTERING MEDIUM |
| ADNP | DROP PRESSURE | NOT RATED |
| ADNQ | DIFFERENTIAL PRESSURE | NOT RATED |
| ABPM | BODY DIAMETER | 6.000 INCHES NOMINAL |
| AZKQ | TEMP RATING | NOT RATED |
| STYL | STYLE DESIGNATOR | CYLINDRICAL W/OUT CONTAINER |
| AZTL | BODY OVERALL LENGTH | 14.500 INCHES NOMINAL |
| ADAS | BODY INSIDE DIAMETER | ANY ACCEPTABLE |
| CRXW | FILTERING MEDIA DESIGN | PLEATED SINGLE FILTERING MEDIA RESPONSE |
| MEDA | MEDIA FOR WHICH DESIGNED | ANY ACCEPTABLE |