Part Number
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
| Code | Company |
|---|---|
| 00268 | CEF INDUSTRIES LLC DBA CEF INDUSTRIE |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AMDM | FIRST END SPLINE LENGTH | 1.125 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 8.224 INCHES MINIMUM AND 8.244 INCHES MAXIMUM |
| CSYM | SURFACE FINISH | 63.0 MICROINCHES |
| CSPY | LARGEST STEP DIAMETER | 0.934 INCHES MINIMUM AND 0.937 INCHES MAXIMUM |
| AMDN | FIRST END SPLINE MINOR DIAMETER | 0.8050 INCHES NOMINAL |
| AAGZ | FIRST END STYLE | SPLINED (STRAIGHT) |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS5643E ASSN STD SINGLE MATERIAL RESPONSE |
| MATT | MATERIAL | STEEL |
| ATPC | STEP QUANTITY | 3 |
| AMDP | FIRST END SPLINE MAJOR DIAMETER | 0.8060 INCHES NOMINAL |
| AAHN | END SIMILARITY | IDENTICAL |
| ZZZV | FSC APPLICATION DATA | HYDRAULIC SYSTEM,ACFT |