Part Number
Definition:
AN EXTERNALLY THREADED FASTENER WHOSE UNTHREADED PORTION IS OF A SPECIFIED GRIP LENGTH, PLATED OR UNPLATED, AND IS MACHINED TO A TOLERANCE OF ONE THOUSANDTH (0.001) OF AN INCH (0.025 MM) OR LESS OF A SPECIFIC DIAMETER FOR ITEMS ONE INCH (25 MM) OR LESS IN DIAMETER. ITEMS OVER ONE INCH (25 MM) IN DIAMETER SHALL HAVE A TOLERANCE OF FIFTEEN TEN-THOUSANDTHS (0.0015) OF AN INCH (0.038 MM) OR LESS. THE NOMINAL MAJOR DIAMETER OF THE THREADS SHALL BE AT LEAST ONE THOUSANDTH (0.001) OF AN INCH (0.025 MM) BELOW THE MINIMUM SHANK DIAMETER, BUT NOT BELOW THE MINIMUM MAJOR DIAMETER FOR APPLICABLE CLASS OF FIT, AS SHOWN IN THE SCREW THREAD STANDARDS, FED STD H28 AND/OR OTHER NATIONALLY RECOGNIZED STANDARDS. THE HEAD IS NOT DESIGNED TO BE HELD OR DRIVEN WITH AN INSERTED DRIVER, NOR IS IT DESIGNED FOR ROTATION BY THE THUMB AND FINGERS. A LOCKING FEATURE MAY BE INCORPORATED IN THE DESIGN OF THE HEAD OR THREADS. FOR ITEMS HAVING CLOSE TOLERANCE, AND FABRICATED FROM MATERIAL HAVING 160,000 POUNDS PER SQUARE INCH (1100 MEGAPASCALS) MINIMUM TENSILE STRENGTH, SEE BOLT, SHEAR. FOR ITEMS FABRICATED FROM MATERIAL HAVING LESS THAN 160,000 POUNDS PER SQUARE INCH (1100 MEGAPASCALS) MINIMUM TENSILE STRENGTH AND NOT HAVING A CLOSE TOLERANCE, SEE BOLT, MACHINE.
CAGE Information
| Code | Company |
|---|---|
| 81755 | LOCKHEED MARTIN CORPORATION DBA LOCK |
Federal Supply Class
Title
BOLTS
Inclusions:
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES GRIP |
| ANEE | GRIP LENGTH | 1.165 INCHES NOMINAL |
| AASA | THREAD LENGTH | 1.150 INCHES NOMINAL |
| AAZH | HEAD MINOR DIAMETER | 0.774 INCHES MINIMUM AND 0.782 INCHES MAXIMUM |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD |
| AATD | EXTENDED WASHER THICKNESS | 0.098 INCHES NOMINAL |
| AAJD | THREAD CLASS | 3A |
| AASK | HEAD STYLE | SPLINE EXTENDED WASHER |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-8837 TY 2 CL 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| CQBC | MINIMUM TENSILE STRENGTH | 220000 POUNDS PER SQUARE INCH |
| AAUR | GRIP DIAMETER | 0.7480 INCHES MINIMUM AND 0.7490 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 16 |
| AASU | HEAD HEIGHT | 0.502 INCHES NOMINAL |
| AHYM | NOMINAL THREAD DIAMETER | 0.750 INCHES |
| AATC | EXTENDED WASHER DIAMETER | 1.400 INCHES NOMINAL |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL AND CHROMATE OVERALL |
| CQFM | HARDNESS RATING | 46.0 ROCKWELL C MINIMUM OVERALL AND 50.0 ROCKWELL C MAXIMUM OVERALL |
| MATT | MATERIAL | STEEL COMP H11 OVERALL |
| AASB | FASTENER LENGTH | 2.300 INCHES MINIMUM AND 2.330 INCHES MAXIMUM |