Part Number
Part Number:
NSN:
NIIN:
Item Name:
HOSE ASSEMBLY , NONMETALLIC
Definition:
A LENGTH OF NONMETALLIC HOSE WITH FITTINGS ON ONE OR BOTH ENDS. FOR ITEMS WITHOUT FITTINGS, SEE HOSE, NONMETALLIC. EXCLUDES HOSE ASSEMBLY, AIR DUCT; AND HOSE ASSEMBLY, AIR DUCT, AIR BREATHING.
CAGE Information
| Code | Company |
|---|---|
| 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMS |
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| ADLF | HOSE OR TUBING SPEC/STD DATA | MIL-H-3992,TYPE 1,CLASS 1 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| CQGH | FIRST END FITTING/COMPONENT AND MATERIAL | COMPLETE FITTING BRASS, QQ-B-626, ALLOY 360, 1/2H |
| AARX | INSIDE DIAMETER | 0.375 INCHES NOMINAL |
| CRXX | MEASURING METHOD AND LENGTH | 19.375 INCHES NOMINAL OVERALL |
| CQJX | NOMINAL THREAD SIZE | 0.250 INCHES 1ST END |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | MILDEW RESISTANT AND OZONE RESISTANT AND ACID RESISTANT AND ABRASION RESISTANT AND FUEL RESISTANT |
| ADJM | INNER CONVEYING TUBE MATERIAL | RUBBER |
| CMLP | THREAD QUANTITY PER INCH | 18 1ST END |
| AHNC | CONNECTION STYLE | INVERTED FLARE 1ST END |
| CQBG | FIRST END SWIVEL ACTION CAPABILITY | NOT INCLUDED |
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END |
| ABKV | OUTSIDE DIAMETER | 0.750 INCHES NOMINAL |
| AWLS | CONNECTION TYPE | THREADED EXTERNAL PIPE 1ST END |
| CQRB | SEAT ANGLE | 30.0 DEGREES 1ST END |
| ABJH | TEMP RATING | -65.0 DEG FAHRENHEIT SINGLE RESPONSE AND 212.0 DEG FAHRENHEIT SINGLE RESPONSE |
| AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| CRDW | HYDROSTATIC TEST PRESSURE | 450.0 POUNDS PER SQUARE INCH |
| CQCS | LAYER COMPOSITION AND LOCATION | OUTER LAYER MOLDED RUBBER, CHLOROPRENE |
| THSD | THREAD SERIES DESIGNATOR | NPTF 1ST END |
| CQBD | BURST TEST PRESSURE | 900.0 POUNDS PER SQUARE INCH |