Part Number
Definition:
A RESISTOR IN WHICH A SLIDING OR ROLLING CONTACT MOVES OVER AN EXPOSED AREA OF THE RESISTIVE ELEMENT TO CHANGE THE OHMIC VALUE OF THE OUTPUT. THE FUNCTIONAL TOLERANCE (LINEARITY), IF GIVEN, OF THE OUTPUT IS GREATER THAN PLUS OR MINUS 1 PERCENT ON LINEAR OUTPUTS. SPECIFIED OUTPUTS SUCH AS SINE, COSINE, TANGENT, ETC., SHALL BE CONSIDERED TO BE PRECISION. FOR ITEMS HAVING MANUALLY POSITIONED TAPS DESIGNED TO BE SET AND FIXED PRIOR TO USE, SEE RESISTOR, ADJUSTABLE. FOR ITEMS WITH STEP BY STEP VARIATION, SEE RHEOSTAT AND RESISTOR, STEP BY STEP. FOR TANDEM-MOUNTED ITEMS DESIGNED TO FUNCTION TOGETHER AS AN ATTENUATOR (AND RATED ACCORDINGLY), SEE ATTENUATOR, VARIABLE. EXCLUDES RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; AND RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
CAGE Information
| Code | Company |
|---|---|
| 12697 | CLAROSTAT SENSORS AND CONTROLS |
Federal Supply Class
Title
RESISTORS
Inclusions:
INCLUDES VARISTORS; RESISTIVE BALLAST TUBES; RHEOSTATS; RESISTOR NETWORKS; RESISTOR MOUNTING HARDWARE; THERMISTORS.
Exclusions:
EXCLUDES RESISTANCE WIRE.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AEEA | SWITCH TYPE | ROTARY |
| ADAQ | BODY LENGTH | 0.974 INCHES NOMINAL |
| AEDX | SHAFT STYLE | ROUND |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| ABWV | SHAFT DIAMETER | 0.125 INCHES NOMINAL |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 120.0 ALL SECTIONS |
| AAPN | SECTION QUANTITY | 2 |
| CBBL | FEATURES PROVIDED | HUMIDITY PROOF AND SWITCH |
| CSDK | SWITCH CURRENT TYPE AND RATING IN AMPS | 1.000 AC/DC |
| AEFN | NONTURN DEVICE LOCATION | AT 9 OCLOCK |
| AJYN | SCREW THREAD DIAMETER | 0.250 INCHES NOMINAL |
| ADAP | MOUNTING BUSHING LENGTH | 0.250 INCHES NOMINAL |
| AEGH | SWITCH OPERATING POSITION | START OF ROTATION |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| TTQY | TERMINAL TYPE AND QUANTITY | 8 TAB, SOLDER LUG |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 325.0 NOMINAL |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0/+10.0 ALL SECTIONS |
| ABPM | BODY DIAMETER | 0.636 INCHES NOMINAL |
| ABXF | SHAFT LENGTH | 0.750 INCHES NOMINAL |
| CQDB | RESISTANCE TEMP CHARACTERISTIC RANGE PER SECTION IN PERCENT | -3.0/+3.0 105 DEG CELSIUS 2ND SECTION AND +0.0/+4.0 -40 DEG CELSIUS 2ND SECTION AND +0.0/+5.5 -55 DEG CELSIUS 2ND SECTION AND -2.5/+2.5 85 DEG CELSIUS 2ND SECTION AND +0.0/+2.0 0 DEG CELSIUS 2ND SECTION AND -4.0/+4.0 120 DEG CELSIUS 2ND SECTION |
| AAQL | BODY STYLE | CYLINDRICAL BUSHING MOUNTED |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| AEED | SWITCH VOLTAGE RATING IN VOLTS | 125.0 |
| CQDB | RESISTANCE TEMP CHARACTERISTIC RANGE PER SECTION IN PERCENT | +0.0/+2.5 0 DEG CELSIUS 1ST SECTION AND -3.5/+3.5 85 DEG CELSIUS 1ST SECTION AND +0.0/+8.0 -40 DEG CELSIUS 1ST SECTION AND -5.5/+5.5 105 DEG CELSIUS 1ST SECTION AND +0.0/+9.0 -55 DEG CELSIUS 1ST SECTION AND -7.0/+7.0 120 DEG CELSIUS 1ST SECTION |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 15.0 GALLONS PER MINUTE C AND BETTER INDUSTRIAL CLEARS |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| APXH | TERMINAL LOCATION | REAR-BOTTOM |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 ALL SECTIONS |
| AEFP | NONTURN DEVICE RADIUS | 0.312 INCHES NOMINAL |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 5.0 PERCENT, RATED AMPERES C AND BETTER FINISH |
| CSDL | STANDARD TAPER CURVE PER SECTION | A ALL SECTIONS |
| AEGJ | SWITCH CONTACT ARRANGEMENT | SINGLE POLE, SINGLE THROW, NORMALLY OPEN, BOTH POSITIONS MAINTAINED |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 300.0 NOMINAL |
| AXGY | MOUNTING METHOD | STANDARD BUSHING |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 HEAT SINK ALL SECTIONS |