Part Number
Part Number:
NSN:
NIIN:
Item Name:
WASHER , SHOULDERED
Definition:
A WASHER, ROUND IN SHAPE, AND HAVING A CENTRALLY LOCATED HOLE. ONE BEARING SURFACE IS FLAT AND UNBROKEN, THE OTHER SURFACE IS IN THE FORM OF A RAISED SHOULDER (BOSS) HAVING A FLAT BEARING SURFACE. THE THICKNESS OF THE SHOULDER (BOSS) MUST NOT EXCEED 25 PERCENT OF THE SHOULDER (BOSS) DIAMETER. FOR ITEMS HAVING A SHOULDER (BOSS) OF GREATER THICKNESS, USE BEARING, SLEEVE; BUSHING SLEEVE; OR SPACER, SLEEVE. EXCLUDES INSULATOR, WASHER AND THRUST TYPE WASHERS.
CAGE Information
| Code | Company |
|---|---|
| 5RQL2 | DRS ENVIRONMENTAL SYSTEMS INC. |
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ABMG | SHOULDER HEIGHT | 0.057 INCHES MINIMUM AND 0.067 INCHES MAXIMUM |
| ABMG | SHOULDER HEIGHT | 0.057 INCHES MINIMUM AND 0.067 INCHES MAXIMUM |
| AAVH | SHOULDER DIAMETER | 0.870 INCHES MINIMUM AND 0.880 INCHES MAXIMUM |
| MATT | MATERIAL | RUBBER SYNTHETIC OVERALL |
| AAUB | HOLE DIAMETER | 0.370 INCHES MINIMUM AND 0.380 INCHES MAXIMUM |
| ABPX | MATERIAL THICKNESS | 0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM |
| CQBC | MINIMUM TENSILE STRENGTH | 1500 POUNDS PER SQUARE INCH |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM D735,TY S+715 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | SHOULDERED |
| CQFM | HARDNESS RATING | 65.0 SHORE DUROMETER A MINIMUM AND 75.0 SHORE DUROMETER A MAXIMUM |
| ABKV | OUTSIDE DIAMETER | 1.495 INCHES MINIMUM AND 1.505 INCHES MAXIMUM |