Part Number
Definition:
A RESISTOR IN WHICH A SLIDING OR ROLLING CONTACT MOVES OVER AN EXPOSED AREA OF THE RESISTIVE ELEMENT TO CHANGE THE OHMIC VALUE OF THE OUTPUT. THE FUNCTIONAL TOLERANCE (LINEARITY), IF GIVEN, OF THE OUTPUT IS GREATER THAN PLUS OR MINUS 1 PERCENT ON LINEAR OUTPUTS. SPECIFIED OUTPUTS SUCH AS SINE, COSINE, TANGENT, ETC., SHALL BE CONSIDERED TO BE PRECISION. FOR ITEMS HAVING MANUALLY POSITIONED TAPS DESIGNED TO BE SET AND FIXED PRIOR TO USE, SEE RESISTOR, ADJUSTABLE. FOR ITEMS WITH STEP BY STEP VARIATION, SEE RHEOSTAT AND RESISTOR, STEP BY STEP. FOR TANDEM-MOUNTED ITEMS DESIGNED TO FUNCTION TOGETHER AS AN ATTENUATOR (AND RATED ACCORDINGLY), SEE ATTENUATOR, VARIABLE. EXCLUDES RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; AND RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
CAGE Information
| Code | Company |
|---|---|
| 12697 | CLAROSTAT SENSORS AND CONTROLS |
Federal Supply Class
Title
RESISTORS
Inclusions:
INCLUDES VARISTORS; RESISTIVE BALLAST TUBES; RHEOSTATS; RESISTOR NETWORKS; RESISTOR MOUNTING HARDWARE; THERMISTORS.
Exclusions:
EXCLUDES RESISTANCE WIRE.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| TTQY | TERMINAL TYPE AND QUANTITY | 6 TAB, SOLDER LUG |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -20.0/+20.0 1ST SECTION |
| AEDX | SHAFT STYLE | ROUND, STEPPED |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -30.0/+30.0 2ND SECTION |
| AGQL | UNDERCUT LENGTH | 0.875 INCHES NOMINAL |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 120.0 ALL SECTIONS |
| AAPN | SECTION QUANTITY | 2 |
| AEFD | ACTUATOR TYPE | DUAL CONCENTRIC |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 40.0 ALL SECTIONS |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ADAQ | BODY LENGTH | 0.938 INCHES NOMINAL |
| CQDB | RESISTANCE TEMP CHARACTERISTIC RANGE PER SECTION IN PERCENT | +0.0/+2.5 0 DEG CELSIUS 2ND SECTION AND +0.0/+5.0 -25 DEG CELSIUS 2ND SECTION AND +0.0/+10.0 -55 DEG CELSIUS 2ND SECTION AND -3.5/+3.5 85 DEG CELSIUS 2ND SECTION AND +0.0/+7.5 120 DEG CELSIUS 2ND SECTION |
| AAQL | BODY STYLE | CYLINDRICAL BUSHING MOUNTED |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| ABXF | SHAFT LENGTH | 1.250 INCHES NOMINAL |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 5.0 PERCENT, RATED AMPERES C AND BETTER FINISH |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.5 FREE AIR ALL SECTIONS |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 300.0 NOMINAL |
| CSDL | STANDARD TAPER CURVE PER SECTION | A ALL SECTIONS |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 300.0 NOMINAL |
| AXGY | MOUNTING METHOD | STANDARD BUSHING |
| CQDB | RESISTANCE TEMP CHARACTERISTIC RANGE PER SECTION IN PERCENT | +0.0/+1.5 0 DEG CELSIUS 1ST SECTION AND +0.0/+3.5 -25 DEG CELSIUS 1ST SECTION AND +0.0/+5.5 -55 DEG CELSIUS 1ST SECTION AND -2.0/+2.0 85 DEG CELSIUS 1ST SECTION AND +0.0/+4.5 120 DEG CELSIUS 1ST SECTION |
| AEDQ | UNDERCUT DIAMETER | 0.125 INCHES NOMINAL |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 5.0 GALLONS PER MINUTE C AND BETTER INDUSTRIAL CLEARS |
| ADAP | MOUNTING BUSHING LENGTH | 0.375 INCHES NOMINAL |
| ABPM | BODY DIAMETER | 0.938 INCHES NOMINAL |
| ABWV | SHAFT DIAMETER | 0.250 INCHES NOMINAL |
| AJYN | SCREW THREAD DIAMETER | 0.375 INCHES NOMINAL |