Part Number
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
| Code | Company |
|---|---|
| 81982 | HYDRO-AIRE INC. |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAHN | END SIMILARITY | NOT IDENTICAL |
| CSPY | LARGEST STEP DIAMETER | 0.145 INCHES NOMINAL |
| AAGZ | FIRST END STYLE | PLAIN |
| AAHP | SECOND END STYLE | PLAIN |
| ABHP | OVERALL LENGTH | 0.610 INCHES NOMINAL |
| FEAT | SPECIAL FEATURES | ENDS CHAMFERED 45 DEG.,WITH DEPTHOF 0.010 NOMINAL,SURFACE TREATMENT PASSIVATED |
| AMDL | FIRST END DIAMETER | 0.0760 INCHES NOMINAL |
| AMFZ | SECOND END DIAMETER | 0.0790 INCHES NOMINAL |
| ZZZV | FSC APPLICATION DATA | VALVE-PRESSURE REGULATOR,P/N 62110-1 |
| MATT | MATERIAL | STEEL |
| ATPC | STEP QUANTITY | 3 |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES |