Part Number
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
| Code | Company |
|---|---|
| 96169 | ELECTRIC BOAT CORPORATION |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AMFZ | SECOND END DIAMETER | 0.7500 INCHES NOMINAL |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| CSPY | LARGEST STEP DIAMETER | 1.500 INCHES NOMINAL |
| AAGZ | FIRST END STYLE | PLAIN |
| AMHA | SECOND END EXTERNAL THREAD LENGTH | 0.6300 INCHES NOMINAL |
| FEAT | SPECIAL FEATURES | 1ST END HAS 2 NOTCHES,0.218 IN.WIDE,180 DEGREES APART;2ND END INT THDS ARE LH |
| CSYM | SURFACE FINISH | 63.0 MICROINCHES |
| AAHP | SECOND END STYLE | EXTERNALLY AND INTERNALLY THREADED |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-B-5687,TYPE 1,GRADE 1 FED SPEC SINGLE MATERIAL RESPONSE |
| AMDL | FIRST END DIAMETER | 1.5000 INCHES NOMINAL |
| MATT | MATERIAL | COPPER ALLOY |
| AMHP | SECOND END INTERNAL THREAD LENGTH | 1.2500 INCHES NOMINAL |
| ATPC | STEP QUANTITY | 3 |
| AGAV | END ITEM IDENTIFICATION | GENERAL DYNAMICS CORP SEAWOLF CLASS SUBMARINE |
| ABHP | OVERALL LENGTH | 2.280 INCHES NOMINAL |