Part Number
Part Number:
NSN:
NIIN:
Item Name:
ATTENUATOR , FIXED
Definition:
A DEVICE FOR REDUCING THE STRENGTH OF AN ALTERNATING CURRENT SIGNAL BY A FIXED OR PREDETERMINED AMOUNT, WITHOUT CAUSING APPRECIABLE SIGNAL DISTORTION, BY MAINTAINING CORRECT IMPEDANCE MATCH.
CAGE Information
| Code | Company |
|---|---|
| 29971 | LORCH MICROWAVE INC. DIV DEFENSE AND |
Federal Supply Class
Title
ANTENNAS, WAVEGUIDES, AND RELATE
Inclusions:
INCLUDES AERIALS; MASTS; TOWER EQUIPMENT; ATTENUATORS; COUPLERS; TRANSMISSION LINES.
Exclusions:
EXCLUDES TOWER STRUCTURES.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ABHP | OVERALL LENGTH | 2.250 INCHES MAXIMUM |
| AKNK | VOLTAGE STANDING WAVE RATIO FREQUENCY RANGE | +20.0/+40.0 MEGAHERTZ |
| AHTZ | OUTPUT IMPEDANCE RATING IN OHMS | 50.0 |
| ABEM | BODY SURFACE TREATMENT | CADMIUM PLATED |
| AHTW | VOLTAGE STANDING WAVE RATIO | 1.30 |
| BBHS | TERMINAL TYPE AND QUANTITY | 2 CONNECTOR AND 3 TAB, SOLDER LUG |
| AAQL | BODY STYLE | RECTANGULAR, TERMINAL/TERMINALS ON OPPOSITE SURFACES |
| ABMK | OVERALL WIDTH | 1.750 INCHES MAXIMUM |
| ZZZV | FSC APPLICATION DATA | COMMUNICATION EQUIPMENT |
| ADAE | MOUNTING HOLE/STUD QUANTITY | 4 |
| ABKQ | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 1.725 INCHES MINIMUM AND 1.775 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 1.750 INCHES NOMINAL |
| ASYN | ATTENUATION ACCURACY IN DECIBELS | -0.20/+0.20 |
| BNGR | FREQUENCY RANGE | 20.000 MEGAHERTZ MINIMUM AND 40.000 MEGAHERTZ MAXIMUM |
| ABKW | OVERALL HEIGHT | 1.000 INCHES MAXIMUM |
| AAFS | APPLICATION DESIGN | TRANSMISSION LINE |
| AEBV | UNTHREADED MOUNTING HOLE DIAMETER | 0.123 INCHES MINIMUM AND 0.133 INCHES MAXIMUM |
| AHUC | COAXIAL CONNECTOR SERIES DESIGNATION | SMA |
| AJDK | RF SIGNAL ATTENUATION IN DECIBELS | 7.7 |
| ABKR | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 1.225 INCHES MINIMUM AND 1.275 INCHES MAXIMUM |
| AAFZ | BODY MATERIAL | BRASS |
| AXGY | MOUNTING METHOD | UNTHREADED HOLE |
| AHTY | INPUT IMPEDANCE RATING IN OHMS | 50.0 |