Part Number
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
| Code | Company |
|---|---|
| 1W025 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ATPC | STEP QUANTITY | 6 |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAHW | SECOND END GROOVE WIDTH | 0.1400 INCHES NOMINAL |
| AMDL | FIRST END DIAMETER | 0.3750 INCHES NOMINAL |
| AAHG | FIRST END GROOVE WIDTH | 0.1400 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 5.3300 INCHES NOMINAL |
| AMFQ | SECOND END DISTANCE FROM END TO GROOVE | 1.1100 INCHES NOMINAL |
| AMGT | SECOND END DISTANCE FROM HOLE CENTER TO END | 0.1880 INCHES NOMINAL |
| AAGZ | FIRST END STYLE | CIRCULAR GROOVED AND EXTERNALLY THREADED |
| AMGS | SECOND END HOLE DIAMETER | 0.1250 INCHES NOMINAL |
| MATT | MATERIAL | STEEL |
| AMEA | FIRST END EXTERNAL THREAD LENGTH | 0.4800 INCHES NOMINAL |
| AAHX | SECOND END GROOVE DIAMETER | 0.3030 INCHES NOMINAL |
| AGAV | END ITEM IDENTIFICATION | 1730-01-350-8521 |
| CSPY | LARGEST STEP DIAMETER | 0.7500 INCHES NOMINAL |
| AAHH | FIRST END GROOVE DIAMETER | 0.2760 INCHES NOMINAL |
| AMFZ | SECOND END DIAMETER | 0.3750 INCHES NOMINAL |
| AMCY | FIRST END DISTANCE FROM END TO GROOVE | 0.4800 INCHES NOMINAL |
| AAHP | SECOND END STYLE | CIRCULAR GROOVED, CROSS DRILLED HOLE, AND EXTERNALLY THREADED |
| AMHA | SECOND END EXTERNAL THREAD LENGTH | 1.1100 INCHES NOMINAL |