Part Number
Definition:
A METALLIC OR NONMETALLIC ITEM OF VARIOUS PERIPHERAL SHAPES AND A SOLID CROSS-SECTION. IT IS DESIGNED TO MAINTAIN A PREDETERMINED DISTANCE BETWEEN TWO SURFACES. IT MAY HAVE FLAT PARALLEL BEARING SURFACES. DO NOT USE IF A MORE SPECIFIC NAME APPLIES. SEE ALSO SPACER, RING; SPACER, PLATE; SPACER, SLEEVE; SPACER, STEPPED; SHIM AND WASHER, FLAT.
CAGE Information
| Code | Company |
|---|---|
| 1W025 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
Federal Supply Class
Title
BUSHINGS, RINGS, SHIMS, AND SPAC
Inclusions:
INCLUDES EXTERNALLY THREADED RINGS; KEYED AND SERRATED LOCK RINGS; DEE RINGS; INSTRUMENT RETAINING RINGS; SHIM SETS AND ASSORTMENTS; PLATE SPACERS; RING SPACERS; SLEEVE SPACERS; STEPPED SPACERS; SPACER SETS AND ASSORTMENTS; SLEEVE BUSHINGS; MACHINE THREADED BUSHINGS; MACHINE THREADED PLUGS.
Exclusions:
EXCLUDES SLEEVE BEARINGS (FSC 3120); PIPE THREADED PLUGS (FSC 4730); PISTON RINGS (FSC 2520, 2805, 2810, 2815, 2825, 2990, 3040, 4310, AND 4820); RETAINING RINGS (FSC 5325); SHIM STOCK (FSC 9515).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35,TY 4 FED SPEC SINGLE TREATMENT RESPONSE |
| SFTT | SURFACE TREATMENT | PASSIVATE |
| AECS | BOLT HOLE QUANTITY | 2 |
| ADUM | OVERALL THICKNESS | 0.063 INCHES NOMINAL |
| MATT | MATERIAL | STEEL COMP 304 |
| ABHC | OVERALL WIDTH | 0.620 INCHES NOMINAL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-766 FED SPEC SINGLE MATERIAL RESPONSE |
| ABXG | OVERALL LENGTH | 1.300 INCHES NOMINAL |
| FEAT | SPECIAL FEATURES | ONE BOLT HOLE HAS NOMINAL DIAMETER OF 0.196 IN.; SECOND BOLT HOLE HAS NOMINAL DIAMETER OF 0.125 IN.; NOMINAL CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH IS 0.790 IN.; NOMINAL DISTANCE FROM BOLT HOLE CENTERLINE TO NEAREST EDGE ALONG WIDTH IS 0,310 IN.; NOMINAL DISTANCE FROM LARGER BOLT HOLE CENTERLINE TO NEAREST EDGE ALONG LENGTH IS 0.310 IN.; NOMINAL DISTANCE FROM SMALLER BOLT HOLE CENTERLINE TO NEAREST EDGE ALONG LENGTH IS 0.200 IN.; FOUR CORNERS ARE UNEQUALLY BEVELED; NOMINAL OUTSIDE CORNER BEVEL LENGTH ALONG WIDTH IS 0.120 IN. FOR TWO CORNERS LOCATED BY LARGER BOLT HOLE; NOMINAL OUTSIDE CORNER BEVEL LENGTH ALONG LENGTH IS 0.120 IN. FOR TWO CORNERS LOCATED BY LARGER BOLT HOLE; NOMINAL OUTSIDE CORNER BEVEL LENGTH ALONG WIDTH IS 0.250 IN. FOR TWO CORNERS LOCATED BY SMALLER BOLT HOLE; NOMINAL OUTSIDE BEVEL LENGTH ALONG LENGTH IS 0.250 IN. FOR TWO CORNERS LOCATED BY SMALLER BOLT HOLE. |