Part Number
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
| Code | Company |
|---|---|
| 1W025 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AGAV | END ITEM IDENTIFICATION | 4920-01-279-8483 |
| AAHP | SECOND END STYLE | CIRCULAR GROOVED |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAGZ | FIRST END STYLE | PLAIN |
| AMDL | FIRST END DIAMETER | 1.0000 INCHES NOMINAL |
| CSPY | LARGEST STEP DIAMETER | 1.000 INCHES NOMINAL |
| AAHX | SECOND END GROOVE DIAMETER | 0.7010 INCHES MINIMUM AND 0.7070 INCHES MAXIMUM |
| MATT | MATERIAL | STEEL CORROSION RESISTING |
| ABHP | OVERALL LENGTH | 3.040 INCHES NOMINAL |
| ATPC | STEP QUANTITY | 2 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM-A-582,416 COND H ASSN STD SINGLE MATERIAL RESPONSE |
| AAHW | SECOND END GROOVE WIDTH | 0.0460 INCHES MINIMUM AND 0.0490 INCHES MAXIMUM |
| AMFQ | SECOND END DISTANCE FROM END TO GROOVE | 0.4110 INCHES NOMINAL |
| AMFZ | SECOND END DIAMETER | 0.7480 INCHES MINIMUM AND 0.7490 INCHES MAXIMUM |