Part Number
Definition:
A STRAIGHT SHAFT HAVING TWO OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE OF 1 TO 125 MICROINCHES (O.O25 TO 3.2 MICROMETERS), ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE (S), KEYWAY(S), SPLINES, THREADS, OR HOLES. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. IT MAY BE DRILLED FOR LUBRICATING HOLES. FOR ITEMS HAVING AN INTEGRAL GEAR(S) OR WORM(S), SEE GEARSHAFT (AS MODIFIED). FOR ITEMS DESIGNED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), STRAIGHT. FOR ITEMS NOT HAVING THE ABOVE CONDITIONS SEE PIN, STRAIGHT, HEADLESS. FOR ITEMS HAVING MACHINED ENDS WHICH CONSTITUTE STEPS SEE SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; AND BOLT, FLUID PASSAGE.
CAGE Information
| Code | Company |
|---|---|
| 1W025 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AMFZ | SECOND END DIAMETER | 0.9940 INCHES MINIMUM AND 0.9980 INCHES MAXIMUM |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAHP | SECOND END STYLE | UNTHREADED CROSS DRILLED |
| AMDE | FIRST END EXTERNAL KEYWAY LENGTH | 0.750 INCHES NOMINAL |
| AAGZ | FIRST END STYLE | FLAT KEYWAY |
| FEAT | SPECIAL FEATURES | SECOND END ALSO HAS KEYWAY,0.2505 IN.WIDE,0.138 IN.DEEP,3.300 IN.LONG |
| AMCZ | FIRST END KEYWAY WIDTH | 0.2505 INCHES MINIMUM AND 0.2525 INCHES MAXIMUM |
| AMGT | SECOND END DISTANCE FROM HOLE CENTER TO END | 0.305 INCHES MINIMUM AND 0.315 INCHES MAXIMUM |
| AMGS | SECOND END HOLE DIAMETER | 0.2010 INCHES MINIMUM AND 0.2130 INCHES MAXIMUM |
| AMDG | FIRST END KEYWAY DEPTH | 0.138 INCHES NOMINAL |
| AGAV | END ITEM IDENTIFICATION | 1730-01-268-9238 |
| ABHP | OVERALL LENGTH | 11.600 INCHES NOMINAL |
| AMDL | FIRST END DIAMETER | 0.9940 INCHES MINIMUM AND 0.9980 INCHES MAXIMUM |
| MATT | MATERIAL | STEEL COMP 4130 |