Part Number
Definition:
A STRAIGHT SHAFT HAVING TWO OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE OF 1 TO 125 MICROINCHES (O.O25 TO 3.2 MICROMETERS), ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE (S), KEYWAY(S), SPLINES, THREADS, OR HOLES. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. IT MAY BE DRILLED FOR LUBRICATING HOLES. FOR ITEMS HAVING AN INTEGRAL GEAR(S) OR WORM(S), SEE GEARSHAFT (AS MODIFIED). FOR ITEMS DESIGNED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), STRAIGHT. FOR ITEMS NOT HAVING THE ABOVE CONDITIONS SEE PIN, STRAIGHT, HEADLESS. FOR ITEMS HAVING MACHINED ENDS WHICH CONSTITUTE STEPS SEE SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; AND BOLT, FLUID PASSAGE.
CAGE Information
| Code | Company |
|---|---|
| 73342 | ALLISON TRANSMISSION INC. DBA ALLISO |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AMDM | FIRST END SPLINE LENGTH | 2.290 INCHES NOMINAL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM-A29 ASSN STD SINGLE MATERIAL RESPONSE AND SAE-J1268 ASSN STD 1ST MATERIAL RESPONSE |
| BDSQ | FIRST END SPLINE QUANTITY | 43 |
| AMFZ | SECOND END DIAMETER | 2.7280 INCHES MINIMUM AND 2.7500 INCHES MAXIMUM |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AMDL | FIRST END DIAMETER | 2.7280 INCHES MINIMUM AND 2.7500 INCHES MAXIMUM |
| AGAV | END ITEM IDENTIFICATION | 2350-01-087-1095 |
| AMGA | SECOND END SPLINE LENGTH | 2.520 INCHES NOMINAL |
| AMDR | FIRST END PRESSURE ANGLE | 30.0 DEGREES NOMINAL |
| ABHP | OVERALL LENGTH | 11.960 INCHES NOMINAL |
| AMDN | FIRST END SPLINE MINOR DIAMETER | 2.5880 INCHES NOMINAL |
| AAGZ | FIRST END STYLE | SPLINED (INVOLUTE) |
| AMGF | SECOND END PITCH DIAMETER | 2.6875 INCHES NOMINAL |
| BDSR | SECOND END SPLINE QUANTITY | 43 |
| FEAT | SPECIAL FEATURES | SECOND END ALSO INTERNALLY DRILLED 2.0487 IN. DIA, 0.960 IN. DEEP; SHAFT HEAT TREATED ROCKWELL C31-37, HARDNESS ROCKWELL C46-52 |
| MATT | MATERIAL | STEEL |
| AAHP | SECOND END STYLE | SPLINED (INVOLUTE) |
| AMGB | SECOND END SPLINE MINOR DIAMETER | 2.5880 INCHES NOMINAL |
| AMGC | SECOND END SPLINE MAJOR DIAMETER | 2.7280 INCHES MINIMUM AND 2.7500 INCHES MAXIMUM |
| AMDP | FIRST END SPLINE MAJOR DIAMETER | 2.7280 INCHES MINIMUM AND 2.7500 INCHES MAXIMUM |
| AMDS | FIRST END PITCH DIAMETER | 2.6875 INCHES NOMINAL |
| CSYM | SURFACE FINISH | 100.0 MICROINCHES |
| AMGE | SECOND END PRESSURE ANGLE | 30.0 DEGREES NOMINAL |