Part Number
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
| Code | Company |
|---|---|
| 73342 | ALLISON TRANSMISSION INC. DBA ALLISO |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| BDSQ | FIRST END SPLINE QUANTITY | 39 |
| TEST | TEST DATA DOCUMENT | 19207-12268045 DRAWING |
| AMDN | FIRST END SPLINE MINOR DIAMETER | 4.6080 INCHES NOMINAL |
| AMDP | FIRST END SPLINE MAJOR DIAMETER | 4.9650 INCHES MINIMUM AND 5.0000 INCHES MAXIMUM |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAHG | FIRST END GROOVE WIDTH | 0.5000 INCHES NOMINAL |
| CSPY | LARGEST STEP DIAMETER | 6.300 INCHES NOMINAL |
| AGAV | END ITEM IDENTIFICATION | 2350-01-087-1095 TANK,ARMORED,BATTLE,CMBT85XM1 |
| AMDM | FIRST END SPLINE LENGTH | 6.000 INCHES NOMINAL |
| AMDL | FIRST END DIAMETER | 4.9650 INCHES MINIMUM AND 5.0000 INCHES MAXIMUM |
| FEAT | SPECIAL FEATURES | HARDNESS ROCKWELL C42-49 EXCEPT AS SHOWN ON DRAWING. TO BE CLEAN AND FREE FROM BURRS |
| AAHH | FIRST END GROOVE DIAMETER | 4.9650 INCHES MINIMUM AND 5.0000 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 14.568 INCHES NOMINAL |
| AAGZ | FIRST END STYLE | CIRCULAR GROOVED AND SPLINED (STRAIGHT) |
| ATPC | STEP QUANTITY | 4 |
| AMCY | FIRST END DISTANCE FROM END TO GROOVE | 11.6000 INCHES NOMINAL |
| MATT | MATERIAL | STEEL COMP 4340 |