Part Number
Part Number:
NSN:
NIIN:
Item Name:
SCREW ASSEMBLY , PANEL
Definition:
A HEADED, THREADED FASTENING DEVICE OVER WHICH MAY BE ASSEMBLED; (1) A STAND-OFF; (2) A FLANGED BUSHING WITH WASHER(S) AND/OR A SHOULDERED BUSHING WITHOUT A FLANGE, OR IT MAY HAVE AN INTERNALLY THREADED SLEEVE THAT IS AN INTEGRAL PART OF THE SCREW; A WASHER AND AN EXTERNALLY THREAD SELF-LOCKING BUSHING THAT IS DRIVEN BY AN INSERTED DRIVER. ATTACHED TO PANEL BY THREADED BUSHING OR BY FLARING END OF STAND-OFF, OR BUSHING. USED IN CONJUNCTION WITH A SPEED NUT, NUT PLATE, OR DRIVEN INTO A THREADED HOLE IN THE ITEM THAT THE PANEL IS FASTENED TO. MAY BE SPRING LOADED.
CAGE Information
| Code | Company |
|---|---|
| 0HDW7 | HUCK INTERNATIONAL INC. DBA ALCOA FA |
Federal Supply Class
Title
SCREWS
Inclusions:
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AHYM | NOMINAL THREAD DIAMETER | 0.190 INCHES |
| MATT | MATERIAL | ALUMINUM ALLOY 6061 STAND-OFF |
| AASK | HEAD STYLE | PAN NO. 2 |
| ABQZ | INTERNAL DRIVE STYLE | SLOT |
| MATT | MATERIAL | STEEL COMP 347 FASTENER OR STEEL COMP 302 FASTENER OR STEEL COMP 316 FASTENER OR STEEL COMP 305 FASTENER OR STEEL COMP 321 FASTENER OR STEEL COMP 304 FASTENER OR STEEL COMP 384 FASTENER OR STEEL COMP 385 FASTENER |
| AASL | HEAD DIAMETER | 0.350 INCHES MINIMUM AND 0.380 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 0.500 INCHES MINIMUM AND 0.530 INCHES MAXIMUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE FASTENER |
| AASU | HEAD HEIGHT | 0.090 INCHES MINIMUM AND 0.120 INCHES MAXIMUM |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625 TYPE 1 CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE STAND-OFF |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/8 FED SPEC SINGLE MATERIAL RESPONSE STAND-OFF |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| AAJD | THREAD CLASS | 2A |
| SFTT | SURFACE TREATMENT | PASSIVATE FASTENER |
| AGSM | MATERIAL ACCOMMODATED THICKNESS | 0.188 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
| AASA | THREAD LENGTH | 0.438 INCHES MINIMUM AND 0.530 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM-A-493 ASSN STD ALL MATERIAL RESPONSES FASTENER |
| SFTT | SURFACE TREATMENT | ANODIZE STAND-OFF |