Part Number
Part Number:
NSN:
NIIN:
Item Name:
SCREW ASSEMBLY , PANEL
Definition:
A HEADED, THREADED FASTENING DEVICE OVER WHICH MAY BE ASSEMBLED; (1) A STAND-OFF; (2) A FLANGED BUSHING WITH WASHER(S) AND/OR A SHOULDERED BUSHING WITHOUT A FLANGE, OR IT MAY HAVE AN INTERNALLY THREADED SLEEVE THAT IS AN INTEGRAL PART OF THE SCREW; A WASHER AND AN EXTERNALLY THREAD SELF-LOCKING BUSHING THAT IS DRIVEN BY AN INSERTED DRIVER. ATTACHED TO PANEL BY THREADED BUSHING OR BY FLARING END OF STAND-OFF, OR BUSHING. USED IN CONJUNCTION WITH A SPEED NUT, NUT PLATE, OR DRIVEN INTO A THREADED HOLE IN THE ITEM THAT THE PANEL IS FASTENED TO. MAY BE SPRING LOADED.
CAGE Information
| Code | Company |
|---|---|
| 17446 | HUCK INTERNATIONAL INC. DBA ALCOA FA |
Federal Supply Class
Title
SCREWS
Inclusions:
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| MATT | MATERIAL | ALUMINUM ALLOY 6061 STAND-OFF |
| AASK | HEAD STYLE | PAN NO. 2 |
| ABQZ | INTERNAL DRIVE STYLE | SLOT |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE FASTENER |
| AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625 TYPE 1 CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE STAND-OFF |
| AGSM | MATERIAL ACCOMMODATED THICKNESS | 0.063 INCHES MINIMUM AND 0.125 INCHES MAXIMUM |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/8 FED SPEC SINGLE MATERIAL RESPONSE STAND-OFF |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| AASA | THREAD LENGTH | 0.688 INCHES MINIMUM AND 0.780 INCHES MAXIMUM |
| AASU | HEAD HEIGHT | 0.065 INCHES MINIMUM AND 0.095 INCHES MAXIMUM |
| AAJD | THREAD CLASS | 2A |
| SFTT | SURFACE TREATMENT | PASSIVATE FASTENER |
| AASB | FASTENER LENGTH | 0.750 INCHES MINIMUM AND 0.780 INCHES MAXIMUM |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM-A-493 ASSN STD ALL MATERIAL RESPONSES FASTENER |
| MATT | MATERIAL | STEEL COMP 305 FASTENER OR STEEL COMP 316 FASTENER OR STEEL COMP 302 FASTENER OR STEEL COMP 321 FASTENER OR STEEL COMP 384 FASTENER OR STEEL COMP 347 FASTENER OR STEEL COMP 304 FASTENER OR STEEL COMP 385 FASTENER |
| SFTT | SURFACE TREATMENT | ANODIZE STAND-OFF |
| AASL | HEAD DIAMETER | 0.250 INCHES MINIMUM AND 0.280 INCHES MAXIMUM |