Part Number
Definition:
A REPLACEABLE DEVICE DESIGNED TO REMOVE SOLID PARTICLES FROM FLUIDS RANGING IN DENSITY FROM HEAVY LIQUIDS TO GASES. THE REMOVAL OF PARTICLES IS ACCOMPLISHED BY POROUS MATERIAL (METALLIC OR NON-METALLIC), STACKED DISKS, WOUND WIRE, OR THE LIKE, CONSTRUCTED SO THE FLUID CAN FLOW THROUGH THE DEVICE WHILE THE SOLID PARTICLES ARE RETAINED. IT MAY BE DESIGNED TO FIT INTO A FILTER, FLUID (OR SIMILAR CAVITY), OR IT MAY HAVE AN INTEGRAL OUTER CASING AND MOUNTING FACILITIES AND BE DESIGNED TO CONNECT DIRECTLY TO AN ENGINE, COMPRESSOR, OR THE LIKE. THE DEGREE OF REMOVAL OF PARTICLES MUST BE NOMINALLY RATED AT LESS THAN 50 MICRONS OR ABSOLUTELY RATED AT LESS THAN 75 MICRONS. EXCLUDES FILTER ELEMENT, AIR CONDITIONING. SEE ALSO STRAINER ELEMENT, SEDIMENT.
CAGE Information
| Code | Company |
|---|---|
| 05430 | MEMTEC AMERICA CORP FILTERITE SALES |
Federal Supply Class
Title
CENTRIFUGALS, SEPARATORS, AND PR
Inclusions:
Exclusions:
EXCLUDES LABORATORY CENTRIFUGES (FSG 65 AND 66); WATER PURIFICATION FILTERS (FSC 4610).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CRXW | FILTERING MEDIA DESIGN | SPUN SINGLE FILTERING MEDIA RESPONSE |
| CXZX | FILTERING SYSTEM FOR WHICH DESIGNED | FULL FLOW |
| ABPM | BODY DIAMETER | 2.700 INCHES NOMINAL |
| ADNP | DROP PRESSURE | 0.5 POUNDS PER SQUARE INCH |
| ADNQ | DIFFERENTIAL PRESSURE | NOT RATED |
| ADNL | FILTERING SURFACE AREA | 8.1 SQUARE FEET |
| MATT | MATERIAL | GLASS FIBER FILTERING MEDIUM |
| MATT | MATERIAL | RUBBER BUNA N SEAL |
| APGF | DESIGN TYPE | LIMITED |
| STYL | STYLE DESIGNATOR | CYLINDRICAL W/OUT CONTAINER |
| ADNH | FILTRATION RATING IN MICRONS | 18.0 ABSOLUTE AND 10.0 NOMINAL |
| AZTL | BODY OVERALL LENGTH | 10.000 INCHES NOMINAL |
| AZKQ | TEMP RATING | 68.0 DEG FAHRENHEIT MINIMUM AND 150.0 DEG FAHRENHEIT MAXIMUM |
| ADAS | BODY INSIDE DIAMETER | 1.000 INCHES NOMINAL |
| ADNK | FLOW DIRECTION | INSIDE OUT |
| MEDA | MEDIA FOR WHICH DESIGNED | ANY ACCEPTABLE |