Part Number
Part Number:
NSN:
NIIN:
Item Name:
MICROCIRCUIT , DIGITAL
Definition:
A MICROCIRCUIT SPECIFICALLY DESIGNED TO GENERATE, MODIFY, OR PROCESS ELECTRICAL SIGNALS WHICH OPERATE WITH TWO DISTINCT OR BINARY STATES. THESE STATES ARE COMMONLY REFERRED TO AS ON AND OFF, TRUE AND FALSE, HIGH AND LOW, OR "1" AND "0".
CAGE Information
| Code | Company |
|---|---|
| 27014 | NATIONAL SEMICONDUCTOR CORPORATION |
Federal Supply Class
Title
MICROCIRCUITS, ELECTRONIC
Inclusions:
INCLUDES INTEGRATED CIRCUIT DEVICES; INTEGRATED CIRCUIT MODULES, INTEGRATED ELECTRONIC DEVICES: HYBRID, MAGNETIC, MOLECULAR, OPTO-ELECTRONIC, AND THIN FILM.
Exclusions:
EXCLUDES SINGLE CIRCUIT ELEMENTS SUCH AS CAPACITORS; RESISTORS; DIODES AND TRANSISTORS; PRINTED CIRCUIT BOARDS AND CIRCUIT CARD ASSEMBLIES; AND FILTERS AND NETWORKS.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CQSZ | INCLOSURE CONFIGURATION | DUAL-IN-LINE |
| AFGA | OPERATING TEMP RANGE | -55.0/+125.0 DEG CELSIUS |
| CBBL | FEATURES PROVIDED | MEDIUM POWER AND POSITIVE OUTPUTS AND 3-STATE OUTPUT AND MONOLITHIC AND HERMETICALLY SEALED AND MEDIUM SPEED |
| AFJQ | STORAGE TEMP RANGE | -65.0/+150.0 DEG CELSIUS |
| ADAU | BODY HEIGHT | 0.140 INCHES MINIMUM AND 0.185 INCHES MAXIMUM |
| AGAV | END ITEM IDENTIFICATION | RADAR SET TYPE AN/FPS-115 |
| CQSJ | INCLOSURE MATERIAL | CERAMIC AND GLASS |
| CQWX | OUTPUT LOGIC FORM | TRANSISTOR-TRANSISTOR LOGIC |
| ADAQ | BODY LENGTH | 0.840 INCHES MAXIMUM |
| CQZP | INPUT CIRCUIT PATTERN | 8 INPUT |
| CZEQ | TIME RATING PER CHACTERISTIC | 17.00 NANOSECONDS MAXIMUM PROPAGATION DELAY TIME, LOW TO HIGH LEVEL OUTPUT AND 16.00 NANOSECONDS MAXIMUM PROPAGATION DELAY TIME, HIGH TO LOW LEVEL OUTPUT |
| ADAT | BODY WIDTH | 0.220 INCHES MINIMUM AND 0.310 INCHES MAXIMUM |
| CTFT | CASE OUTLINE SOURCE AND DESIGNATOR | D-2 MIL-M-38510 |
| AEHX | MAXIMUM POWER DISSIPATION RATING | 468.0 MILLIWATTS |
| CSSL | DESIGN FUNCTION AND QUANTITY | 6 DRIVER, BUS |
| TEST | TEST DATA DOCUMENT | 49956-775726 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |