Part Number
Part Number:
NSN:
NIIN:
Item Name:
MOUNT , RESILIENT , WEAPON SYSTEM
Definition:
AN ITEM MADE OF MATERIAL HAVING ELASTIC PROPERTIES. IT MAY HAVE RIGID MOUNTING FACILITIES SUCH AS A FLANGE(S), SLEEVE(S), STUD(S) OR THE LIKE. IT IS DESIGNED TO ISOLATE OR DAMPEN SHOCK AND/OR VIBRATION OF A CONTINUOUS OR INTERMITTENT ORIGIN AND SERVE AS A SUPPORT FOR A WEAPON SYSTEM COMPONENT TO BE ISOLATED. EXCLUDES MOUNT, RESILIENT, GENERAL PURPOSE; SPRING (AS MODIFIED); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; HYDRAULIC AND PNEUMATIC SHOCK ABSORBERS, DASH-POTS, GROMMETS, AND SHOCK PADS.
CAGE Information
| Code | Company |
|---|---|
| 81860 | BARRY WRIGHT CORPORATION DBA BARRY C |
Federal Supply Class
Title
HARDWARE, WEAPON SYSTEM
Inclusions:
INCLUDES ADAPTERS; ANCHOR PLATES AND STRAPS; ANODES; BELLOWS; COUPLINGS; CONTROL RODS; ACCESS DOORS; FAIRLEADS; MOUNTS; TIE RODS; YOKES.
Exclusions:
EXCLUDES COMMERCIAL HARDWARE (FSC 5340).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| HGTH | HEIGHT | 0.781 INCHES NOMINAL |
| HGTH | HEIGHT | 0.781 INCHES NOMINAL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763, CLASS 303 FED SPEC SINGLE MATERIAL RESPONSE WASHER |
| BXDM | RESILIENT MEMBER MATERIAL | SILICONE RUBBER |
| ABKU | FLANGE THICKNESS | 0.110 INCHES MINIMUM AND 0.130 INCHES MAXIMUM |
| MATT | MATERIAL | STEEL COMP 303 WASHER |
| AARX | INSIDE DIAMETER | 0.193 INCHES MINIMUM AND 0.199 INCHES MAXIMUM |
| AFQM | DISTANCE BETWEEN MOUNTING HOLE CENTERS | 1.414 INCHES NOMINAL |
| BXCQ | FLANGE MOUNTING HOLE DIAMETER | 0.213 INCHES NOMINAL |
| BXCW | LOAD/FREQUENCY RANGE | 7.0 LB LOAD FOR 25 TO 48 HERTZ |
| STYL | STYLE DESIGNATOR | ROUND W/FLANGED BUSHING TWO-HOLE FLANGE |
| MATT | MATERIAL | ALUMINUM ALLOY MOUNTING PLATE |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763, CLASS 303 FED SPEC SINGLE MATERIAL RESPONSE CORE |
| MATT | MATERIAL | STEEL COMP 303 CORE |
| AYXK | MAXIMUM LOAD RATING | 7.0 POUNDS |
| AGFF | FLANGE WIDTH | 1.120 INCHES NOMINAL |
| BXCD | DISTANCE FROM FLANGE TO END | 0.440 INCHES MINIMUM AND 0.460 INCHES MAXIMUM |
| AFQN | FLANGE LENGTH | 1.771 INCHES MINIMUM AND 1.791 INCHES MAXIMUM |
| SFTT | SURFACE TREATMENT | ANODIZE MOUNTING PLATE |
| FEAT | SPECIAL FEATURES | SLOTSLOTS 0.120 IN. BY 0.150 IN. DEEP EQUALLY SPACED ON BOTH SIDES |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/8, ALLOY 5052 FED SPEC SINGLE MATERIAL RESPONSE MOUNTING PLATE |