Part Number
Definition:
A GENERATOR PRIMARILY DESIGNED TO BE MOUNTED ON AN INTERNAL COMBUSTION ENGINE, AND TO BE DRIVEN BY THE ENGINE TO KEEP THE BATTERY IN A CHARGED CONDITION. MAY ALSO SUPPLY CURRENT FOR THE ENGINE IGNITION SYSTEM AND/OR ELECTRICAL EQUIPMENT WHICH IS CONNECTED TO THE BATTERY CIRCUIT. INCLUDES ALTERNATING CURRENT GENERATORS DESIGNED FOR USE WITH A RECTIFIER. EXCLUDES THE MAJOR GENERATOR OF "GENERATING SETS". FOR GENERATORS SPECIFICALLY DESIGNED FOR AIRCRAFT USE AND NOT MOUNTED ON THE ENGINE, SEE GENERATOR, DIRECT CURRENT.
CAGE Information
| Code | Company |
|---|---|
| 12204 | DAIMLER CHRYSLER |
Federal Supply Class
Title
ENGINE ELECTRICAL SYSTEM COMPONE
Inclusions:
INCLUDES GENERATORS; MAGNETOS; SPARK PLUGS; IGNITION COILS; IGNITION DISTRIBUTORS; ENGINE VOLTAGE REGULATORS; IGNITION HARNESS ASSEMBLIES; STARTING MOTORS FOR ENGINES.
Exclusions:
EXCLUDES VEHICULAR LIGHTING FIXTURES (FSC 6220) AND AIRCRAFT GENERATORS (FSC 2925).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ABPW | THIRD STEP LENGTH | 0.750 INCHES NOMINAL |
| BCMJ | CENTER TO CENTER DISTANCE BETWEEN TOP MOUNTING SLOT AND BOTTOM MOUNTING HOLE | 5.375 INCHES NOMINAL |
| BCNB | SECOND KEYWAY LENGTH | 0.625 INCHES NOMINAL |
| BZRR | THREAD SERIES | UNF |
| ABGD | SLOT LENGTH | 1.750 INCHES NOMINAL |
| BCMH | BOTTOM MOUNTING HOLE DIAMETER | 0.406 INCHES NOMINAL |
| BCGG | MINIMUM CURRENT CUT-IN SPEED IN RPM | ANY ACCEPTABLE |
| BCMY | FIRST KEYWAY LENGTH | 0.500 INCHES NOMINAL |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| AKCT | SHAFT ROTATION DIRECTION | CLOCKWISE |
| BCGT | COTTER PIN HOLE | INCLUDED |
| AHZV | SUBMERSIBILITY | NONSUBMERSIBLE |
| BCMX | FIRST KEYWAY WIDTH | 0.125 INCHES NOMINAL |
| ADPY | PILOT HEIGHT | 0.188 INCHES NOMINAL |
| BCMW | DISTANCE FROM END TO FIRST KEYWAY CENTER | 0.312 INCHES NOMINAL |
| AGAW | CENTER TO CENTER DISTANCE BETWEEN MOUNTING SLOTS | 3.250 INCHES NOMINAL |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ABPR | FIRST STEP DIAMETER | 0.499 INCHES NOMINAL |
| AAVL | PILOT DIAMETER | 3.624 INCHES NOMINAL |
| AKAE | MAXIMUM OPERATING ALTITUDE RATING | NOT RATED |
| BCGS | SHAFT DRIVE END STYLE | STRAIGHT SHAFT END, THREADED W/DOUBLE KEYWAY |
| BCMZ | DISTANCE FROM END TO SECOND KEYWAY CENTER | 1.562 INCHES NOMINAL |
| BCNC | SECOND KEYWAY WIDTH | 0.156 INCHES NOMINAL |
| BCGD | ARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT | ANY ACCEPTABLE |
| ADER | MOUNTING STYLE | FLANGE MTD W/TWO MTG SLOTS AND ONE MTG HOLE |
| BCGN | GROUNDING METHOD | EXTERNAL |
| BCLY | DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER | 2.812 INCHES NOMINAL |
| BCND | MAXIMUM RATED ARMATURE SPEED IN RPM | 1500 |
| AWDP | THREAD DIAMETER | 0.625 INCHES NOMINAL |
| BCGF | MAXIMUM OUTPUT CURRENT RATING IN AMPS | 12.0 |
| AASA | THREAD LENGTH | 0.438 INCHES NOMINAL |
| ABGC | SLOT WIDTH | 0.438 INCHES NOMINAL |
| CFHL | THREAD CLASS | 2A |
| ABPS | FIRST STEP LENGTH | 0.562 INCHES NOMINAL |
| ELEC | VOLTAGE IN VOLTS | 12.0 |
| ABPV | THIRD STEP DIAMETER | 0.750 INCHES NOMINAL |