Part Number
Definition:
A REPLACEABLE DEVICE DESIGNED TO REMOVE SOLID PARTICLES FROM FLUIDS RANGING IN DENSITY FROM HEAVY LIQUIDS TO GASES. THE REMOVAL OF PARTICLES IS ACCOMPLISHED BY POROUS MATERIAL (METALLIC OR NON-METALLIC), STACKED DISKS, WOUND WIRE, OR THE LIKE, CONSTRUCTED SO THE FLUID CAN FLOW THROUGH THE DEVICE WHILE THE SOLID PARTICLES ARE RETAINED. IT MAY BE DESIGNED TO FIT INTO A FILTER, FLUID (OR SIMILAR CAVITY), OR IT MAY HAVE AN INTEGRAL OUTER CASING AND MOUNTING FACILITIES AND BE DESIGNED TO CONNECT DIRECTLY TO AN ENGINE, COMPRESSOR, OR THE LIKE. THE DEGREE OF REMOVAL OF PARTICLES MUST BE NOMINALLY RATED AT LESS THAN 50 MICRONS OR ABSOLUTELY RATED AT LESS THAN 75 MICRONS. EXCLUDES FILTER ELEMENT, AIR CONDITIONING. SEE ALSO STRAINER ELEMENT, SEDIMENT.
CAGE Information
| Code | Company |
|---|---|
| 44114 | BAE SYSTEMS LAND & ARMAMENTS L.P. DI |
Federal Supply Class
Title
CENTRIFUGALS, SEPARATORS, AND PR
Inclusions:
Exclusions:
EXCLUDES LABORATORY CENTRIFUGES (FSG 65 AND 66); WATER PURIFICATION FILTERS (FSC 4610).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ADNK | FLOW DIRECTION | OUTSIDE IN |
| ADNK | FLOW DIRECTION | OUTSIDE IN |
| AZTL | BODY OVERALL LENGTH | 1.490 INCHES MINIMUM AND 1.510 INCHES MAXIMUM |
| CRXW | FILTERING MEDIA DESIGN | SPIRAL WOUND SINGLE FILTERING MEDIA RESPONSE |
| ADNP | DROP PRESSURE | NOT RATED |
| ADNQ | DIFFERENTIAL PRESSURE | NOT RATED |
| MATT | MATERIAL | STEEL FILTERING MEDIUM |
| APGF | DESIGN TYPE | REUSABLE |
| AZKQ | TEMP RATING | 400.0 DEG FAHRENHEIT NOMINAL |
| ADNH | FILTRATION RATING IN MICRONS | 40.0 NOMINAL |
| STYL | STYLE DESIGNATOR | CYLINDRICAL W/OUT CONTAINER |
| ABPM | BODY DIAMETER | 0.747 INCHES MINIMUM AND 0.749 INCHES MAXIMUM |
| ADAS | BODY INSIDE DIAMETER | 0.540 INCHES NOMINAL |
| MEDA | MEDIA FOR WHICH DESIGNED | ANY ACCEPTABLE |