Part Number
Definition:
A MECHANICAL DEVICE DESIGNED TO CONVERT THE ENERGY OF FLUID PRESSURE TO ROTARY MOTION.
CAGE Information
| Code | Company |
|---|---|
| 62983 | EATON AEROSPACE LLC |
Federal Supply Class
Title
AIRCRAFT HYDRAULIC, VACUUM, AND
Inclusions:
INCLUDES HYDRAULIC AND PNEUMATIC ACCUMULATORS, PUMPS, MOTORS, ACTUATING CYLINDERS, AND FILTERS; DE-ICING BOOTS; FLUID TYPE DE-ICING PUMPS, VALVES AND FILTERS; VACUUM SYSTEM OIL SEPARATORS; PNEUMATIC PRESSURIZATION EQUIPMENT OTHER THAN THAT FOR PRESSURIZING CABINS AND COMPARTMENTS.
Exclusions:
EXCLUDES JET ENGINE HYDRAULIC COMPONENTS (FSC 2840); VALVES SPECIFICALLY DESIGNED FOR AIR CONDITIONING, HEATING, VENTILATING, CABIN PRESSURIZING, AND THERMAL DE-ICING (FSC 1660); VALVES SPECIFICALLY DESIGNED FOR USE WITH AIRCRAFT ENGINES (FSC 2840); GUIDED MISSILES AND GUIDED MISSILE ENGINES (FSC 1338), LANDING GEAR (FSC 1620), WHEEL AND BRAKE SYSTEM COMPONENTS (FSC 1630); OXYGEN BREATHING SYSTEM COMPONENTS (FSC 1660); IN-FLIGHT REFUELING SYSTEM HYDRAULIC COMPONENTS (FSC 1680); SPECIFICALLY DESIGNED HYDRAULIC POWER STEERING SYSTEM COMPONENTS (FSC 1620).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AGJS | PITCH DIAMETER | 0.375 INCHES NOMINAL |
| AWLS | CONNECTION TYPE | DRAIN |
| AAUH | SPLINE MINOR DIAMETER | 0.3466 INCHES NOMINAL |
| AAUJ | SPLINE MAJOR DIAMETER | 0.4063 INCHES NOMINAL |
| AXFH | SPLINE LENGTH | 0.672 INCHES NOMINAL |
| AXFP | DISPLACEMENT TYPE | CONSTANT |
| ABTJ | MOUNTING HOLE QUANTITY | 4 |
| ASAP | SPLINE PITCH | 32/64 |
| ZZZV | FSC APPLICATION DATA | HYDRAULIC SYSTEM AIRCRAFT |
| AXFN | MOUNTING GOVERNMENT STANDARD | AND10260 |
| AXFG | SPLINE PRESSURE ANGLE IN DEG | 30.0 |
| ABSA | SPLINE QUANTITY | 12 |
| AKCT | SHAFT ROTATION DIRECTION | COUNTERCLOCKWISE |
| AZFG | MOUNTING BOLT HOLE SPACING | 1.876 IN. BY 1.876 IN. C TO C |
| ARQA | SHAFT PROTRUSION LENGTH | 1.060 INCHES NOMINAL |
| AZFE | CONNECTION GOVERNMENT SPEC/STD | AND 10050-6 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AXFC | CONNECTION DESIGN | THREADED |
| AXFM | DRIVE SHAFT GOVERNMENT STANDARD | AND10260 |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNF |
| ZZZW | DEPARTURE FROM CITED DOCUMENT | NRQE |
| AXFQ | CONSTANT DISPLACEMENT PER REVOLUTION | 0.095 CUBIC INCHES |
| AJAB | DRIVE SHAFT TYPE | SPLINED, INVOLUTE INTERNAL |
| AEQC | OPERATING SPEED AT RATED CAPACITY IN RPM | 3000.0 |
| ZZZY | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | AS DIFFERENTIATED BY SOURCE CONTROL DRAWING |
| ABTB | MOUNTING HOLE DIAMETER | 0.281 INCHES NOMINAL |
| AJLF | HOUSING MATERIAL | ALUMINUM |
| APJC | THREAD LOCATION | INTERNAL |
| ABUJ | THREAD SIZE | 7/16-20 |
| AZFH | HOUSING SURFACE TREATMENT | ANODIZED |
| AAXX | MOUNTING TYPE | FLANGE |
| ASMM | CONNECTION QUANTITY | 1 |
| AAPL | TORQUE LOAD RATING | 45.0 INCH-POUNDS |
| AXFB | MAXIMUM WORKING PRESSURE RATING AT SPECIFIED TEMP RANGE | 3000 AT MINUS 65 DEG F TO PLUS 275 DEG F |