Part Number
Definition:
AN ITEM CONSISTING OF INSULATING MATERIAL, WHICH IS SPECIFICALLY DESIGNED TO HAVE FASTENED THEREON, OR ON WHICH ARE FASTENED TERMINAL(S), SUCH AS SCREWS, SOLDER LUGS, SOLDER STUDS, SOLDERLESS CONNECTORS, CLIPS, AND THE LIKE. IT IS USUALLY USED FOR JUNCTIONS OR TERMINATIONS OF WIRE OR CABLE ASSEMBLIES. IT DOES NOT INCLUDE ITEMS AS DEFINED ABOVE WITH PARTS, SUCH AS RESISTORS AND CAPACITORS MOUNTED THEREON. DO NOT USE IF A MORE SPECIFIC NAME EXISTS, SUCH AS FUSEHOLDER; HOLDER, RESISTOR; FANNING STRIP; CONTACT ASSEMBLY, ELECTRICAL; JACK ASSEMBLY, TIP; CHAMBER, CABLE TERMINAL; PANEL (2) (AS MODIFIED); CONNECTOR (AS MODIFIED). EXCLUDES TERMINAL, STUD; TERMINAL, FEEDTHRU, INSULATED; POST, BINDING, ELECTRICAL; AND CHASSIS, ELECTRICAL-ELECTRONIC EQUIPMENT. FOR ITEMS HAVING PRINTED ELECTRICAL CONDUCTOR PATHS, SEE PRINTED WIRING BOARD.
CAGE Information
| Code | Company |
|---|---|
| 14756 | WILBRECHT ELECTRONICS INC ELECPAC DI |
Federal Supply Class
Title
LUGS, TERMINALS, AND TERMINAL ST
Inclusions:
INCLUDES BINDING POSTS; BATTERY CLIPS; STUD TERMINALS; TEST CLIPS.
Exclusions:
EXCLUDES CAPS, ELECTRICAL; CLIPS, ELECTRICAL; AND CONTACTS, ELECTRICAL.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAMA | MOUNTING HOLE DIAMETER | 0.130 INCHES |
| AAMA | MOUNTING HOLE DIAMETER | 0.130 INCHES |
| ABCX | BOARD CONSTRUCTION | SOLID CONSTRUCTION |
| ABDV | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 1.781 INCHES |
| CQCW | FEEDTHRU CONNECTION END TYPE | 434 BOTH ENDS SINGLE COMBINATION |
| ABCU | DISTANCE BETWEEN TERMINAL ROW CENTERS | 0.250 INCHES |
| ABGN | BOARD OVERALL LENGTH | 5.010 INCHES |
| ABCS | TERMINAL ROW QUANTITY | 2 |
| CWLG | TERMINAL PATTERN ARRANGEMENT | MULTI-ROW |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-T-10727,TYPE 1 MIL SPEC SINGLE TREATMENT RESPONSE BOARD |
| ABGT | BOARD THICKNESS | 0.090 INCHES |
| AAQL | BODY STYLE | STRIP TYPE |
| ABDW | DISTANCE FROM BOTTOM EDGE OF TERMINAL BOARD TO CENTER OF MOUNTING HOLE | 0.130 INCHES |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 8 UNTHREADED HOLE |
| MATT | MATERIAL | STEEL BOARD |
| ABDU | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 1.578 INCHES |
| CRZR | FEEDTHRU TERMINAL QUANTITY | 25 SINGLE COMBINATION |
| SFTT | SURFACE TREATMENT | TIN BOARD |
| CWLN | TERMINAL DESIGN | VERTICAL FEEDTHRU |
| ABCT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.250 INCHES |
| MARK | SPECIAL MARKINGS | E1,E6,E11,E16,E21 |
| ABDX | DISTANCE FROM LEFT EDGE OF TERMINAL BOARD TO CENTER OF FIRST MOUNTING FACILITY | 0.130 INCHES |
| ABGP | BOARD OVERALL WIDTH | 2.060 INCHES |