Part Number
Definition:
A BOLTLIKE ITEM HAVING A CONCENTRIC HOLE ALONG THE LONGITUDINAL CENTERLINE WHICH MAY EXTEND A PART OR THE FULL LENGTH OF THE ITEM. IT HAS A HOLE(S) PERPENDICULAR TO THE AXIS, JOINING OR PASSING THROUGH THE CONCENTRIC HOLE ALONG THE LONGITUDINAL CENTERLINE. THE ITEM IS DESIGNED TO DISTRIBUTE FLUID, AIR, OR LUBRICANT THROUGH ITS BODY TO A MATING ITEM, SUCH AS A CONNECTOR, MULTIPLE, FLUID PRESSURE LINE, BEARING(S), BUSHING(S), OR THE LIKE. THE ITEM MUST BE CAPABLE OF ATTACHING TO A BLOCK FITTING AND/OR A TUBING LINE OR BE DESIGNED TO ACCOMMODATE A FITTING, LUBRICATION. EXCLUDES BOLT, INTERNALLY RELIEVED BODY; BLEEDER VALVE, HYDRAULIC SYSTEM; AND BUSHING, MACHINE THREAD. SEE ALSO PIN, VEHICULAR LEAF SPRING SHACKLE.
CAGE Information
| Code | Company |
|---|---|
| 01276 | EATON-AEROQUIP INC DIV FLUID CONNECT |
Federal Supply Class
Title
HOSE, PIPE, TUBE, LUBRICATION, A
Inclusions:
INCLUDES ADAPTERS; BENDS; CAPS; CLAMPS; CONNECTORS; COUPLINGS; CROSSES; ELBOWS; EXPANSION JOINTS; FERRULES; FLANGES; LATERALS; LUBRICATION FITTINGS; MANIFOLDS; NIPPLES; NOZZLES; OUTLETS; PLUGS; REDUCERS; SWING AND SWIVEL JOINTS; TEES; TRAPS; UNIONS; WYES.
Exclusions:
EXCLUDES AIR CONDITIONING-HEATING FITTINGS (FSC 4520); BITUMINIZED FIBER AND CONCRETE FITTINGS (FSC 5630); CONDUIT BOXES AND FITTINGS (FSC 5975); DOWNSPOUT FITTINGS (FSC 5670); MEDICAL AND SURGICAL FITTINGS (FSC 6515); LABORATORY FITTINGS (FSC 6640); POST CAPS AND RAIL ENDS (FSC 5660); MACHINE THREAD BUSHINGS AND PLUGS (FSC 5365).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ACKN | FIRST END STYLE DESIGNATOR | FLARELESS |
| BBKM | SECOND DIAMETER FROM WRENCHING FEATURE | 0.433 INCHES NOMINAL |
| ACLT | SECOND END STYLE DESIGNATOR | FLARELESS |
| ASDB | WIDTH ACROSS FLATS | 0.871 INCHES MINIMUM AND 0.878 INCHES MAXIMUM |
| CQMM | FIRST END THREAD SERIES DESIGNATOR | UNJF |
| ATKZ | FIRST END THREAD LENGTH | 0.956 INCHES NOMINAL |
| BBKP | FOURTH DIAMETER FROM WRENCHING FEATURE | 0.433 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 4.068 INCHES NOMINAL |
| BGST | PRESSURE RATING | 3000.0 POUNDS PER SQUARE INCH NOMINAL |
| BBDF | WRENCHING FEATURE STYLE | HEXAGON |
| ATLF | SECOND END THREAD LENGTH | 0.386 INCHES NOMINAL |
| CRCN | SECOND END SEAT ANGLE | 12.0 DEGREES NOMINAL |
| BBKN | THIRD DIAMETER FROM WRENCHING FEATURE | 0.499 INCHES NOMINAL |
| CPHW | LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF SIXTH DIAMETER | 2.206 INCHES NOMINAL |
| ACMS | SECOND END THREAD DIRECTION | RIGHT-HAND |
| BBLC | DISTANCE FROM SECOND RADIAL HOLE CENTER TO END OF BOLT | 1.622 INCHES NOMINAL |
| ACLL | FIRST END THREAD DIRECTION | RIGHT-HAND |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TYPE 2,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE |
| BBKS | LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF SECOND DIAMETER | 0.726 INCHES NOMINAL |
| BBKY | FIRST RADIAL FLUID HOLE DIAMETER | 0.189 INCHES NOMINAL |
| SFTT | SURFACE TREATMENT | ANODIZE |
| BBKL | FIRST DIAMETER FROM WRENCHING FEATURE | 0.499 INCHES NOMINAL |
| BBLF | WRENCHING FEATURE HEIGHT | 0.437 INCHES NOMINAL |
| CRNB | SECOND END NOMINAL THREAD SIZE | 0.562 INCHES |
| BBKZ | SECOND RADIAL FLUID HOLE DIAMETER | 0.189 INCHES NOMINAL |
| BBLB | DISTANCE FROM FIRST RADIAL HOLE CENTER TO END OF BOLT | 2.622 INCHES NOMINAL |
| BBKQ | FIFTH DIAMETER FROM WRENCHING FEATURE | 0.499 INCHES NOMINAL |
| BBKX | LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF FIFTH DIAMETER | 2.034 INCHES NOMINAL |
| AAQL | BODY STYLE | BODY WRENCHING |
| BBKT | LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF THIRD DIAMETER | 1.354 INCHES NOMINAL |
| CPHT | SIXTH DIAMETER FROM WRENCHING FEATURE | 0.363 INCHES NOMINAL |
| CQYM | FIRST END NOMINAL THREAD SIZE | 0.438 INCHES |
| BBLD | LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO BOLT END | 3.162 INCHES NOMINAL |
| CRPF | SECOND END THREAD SERIES DESIGNATOR | UNJF |
| BBKR | LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF FIRST DIAMETER | 0.425 INCHES NOMINAL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/6,T6,T62 OR T851 FED SPEC SINGLE MATERIAL RESPONSE |
| ACLS | SECOND END CONNECTION TYPE | THREADED EXTERNAL TUBE |
| CQPR | FIRST END SEAT ANGLE | 12.0 DEGREES NOMINAL |
| AAXC | CONCENTRIC HOLE DIAMETER | 0.234 INCHES NOMINAL |
| ACKM | FIRST END CONNECTION TYPE | THREADED EXTERNAL TUBE |
| BBKW | LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF FOURTH DIAMETER | 1.666 INCHES NOMINAL |
| ACLK | FIRST END THREAD CLASS | 3A |
| ACMR | SECOND END THREAD CLASS | 3A |
| ZZZK | SPECIFICATION/STANDARD DATA | 96906-MS21941 GOVERNMENT STANDARD |
| MATT | MATERIAL | ALUMINUM ALLOY 2024 |