Part Number
Definition:
A RESISTOR IN WHICH A SLIDING OR ROLLING CONTACT MOVES OVER AN EXPOSED AREA OF THE RESISTIVE ELEMENT TO CHANGE THE OHMIC VALUE OF THE OUTPUT. THE FUNCTIONAL TOLERANCE (LINEARITY), IF GIVEN, OF THE OUTPUT IS GREATER THAN PLUS OR MINUS 1 PERCENT ON LINEAR OUTPUTS. SPECIFIED OUTPUTS SUCH AS SINE, COSINE, TANGENT, ETC., SHALL BE CONSIDERED TO BE PRECISION. FOR ITEMS HAVING MANUALLY POSITIONED TAPS DESIGNED TO BE SET AND FIXED PRIOR TO USE, SEE RESISTOR, ADJUSTABLE. FOR ITEMS WITH STEP BY STEP VARIATION, SEE RHEOSTAT AND RESISTOR, STEP BY STEP. FOR TANDEM-MOUNTED ITEMS DESIGNED TO FUNCTION TOGETHER AS AN ATTENUATOR (AND RATED ACCORDINGLY), SEE ATTENUATOR, VARIABLE. EXCLUDES RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; AND RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
CAGE Information
| Code | Company |
|---|---|
| 30983 | MEPCOPAL CO A JOINT VENTURE |
Federal Supply Class
Title
RESISTORS
Inclusions:
INCLUDES VARISTORS; RESISTIVE BALLAST TUBES; RHEOSTATS; RESISTOR NETWORKS; RESISTOR MOUNTING HARDWARE; THERMISTORS.
Exclusions:
EXCLUDES RESISTANCE WIRE.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| APXH | TERMINAL LOCATION | LEFT ADJACENT SIDE TWO ROWS |
| ADAT | BODY WIDTH | 0.170 INCHES NOMINAL |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 5400.0 MINIMUM AND 10800.0 MAXIMUM |
| AAPN | SECTION QUANTITY | 1 |
| ZZZK | SPECIFICATION/STANDARD DATA | 81349-MIL-R-39035/2 GOVERNMENT SPECIFICATION |
| ABWV | SHAFT DIAMETER | 0.075 INCHES NOMINAL |
| CBME | CUBIC MEASURE | 0.024 CUBIC INCHES |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 PIN |
| AXGY | MOUNTING METHOD | TERMINAL |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -250.0/+250.0 SINGLE SECTION |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 SINGLE SECTION |
| AARG | RELIABILITY INDICATOR | ESTABLISHED |
| AEDZ | SHAFT BEARING TYPE | SLEEVE |
| AAQL | BODY STYLE | RECTANGULAR |
| ABJT | TERMINAL LENGTH | 0.300 INCHES MINIMUM |
| ADAU | BODY HEIGHT | 0.375 INCHES NOMINAL |
| AARH | RELIABILITY FAILURE RATE LEVEL IN PERCENT | 0.010 |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.100 NOMINAL INCHES |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0/+10.0 SINGLE SECTION |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 5400.0 MINIMUM AND 10800.0 MAXIMUM |
| AEFL | MAXIMUM RUNNING TORQUE | 5.00 INCH-OUNCES |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 85.0 SINGLE SECTION |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.200 INCHES NOMINAL |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH |
| ABXF | SHAFT LENGTH | 0.080 INCHES MAXIMUM |
| TEST | TEST DATA DOCUMENT | 81349-MIL-R-39035 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.5 7TH SECONDARY QUALITY |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEDX | SHAFT STYLE | ROUND, SLOTTED |
| AEFK | MAXIMUM STARTING TORQUE | 5.00 INCH-OUNCES |
| CSDL | STANDARD TAPER CURVE PER SECTION | A SINGLE SECTION |
| ADAQ | BODY LENGTH | 0.420 INCHES MAXIMUM |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 1.0 GALLONS PER MINUTE C AND BETTER FLOORING |
| AYQR | CENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS | 0.100 INCHES NOMINAL |