Part Number
Definition:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
CAGE Information
| Code | Company |
|---|---|
| K0680 | ROLLS-ROYCE AIRLINES |
Federal Supply Class
Title
NUTS AND WASHERS
Inclusions:
INCLUDES LOCKNUTS; EYE NUTS; PLAIN NUTS; CASTELLATED NUTS; WING NUTS; PLATE NUTS; PUSH ON NUTS; CONCAVE AND CONVEX WASHERS; FLAT WASHERS; KEYED WASHERS; LOCK WASHERS; SHOULDERED WASHERS; SPLIT WASHERS.
Exclusions:
EXCLUDES BEARING THRUST WASHERS (FSC 3120); SHIMS (FSC 5365); RING SPACERS (FSC 5365); PLATE SPACERS (FSC 5365); LOCK RINGS (FSC 5365).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CRSD | TOP RECESS ANGLE | 90.0 DEGREES NOMINAL |
| CQJW | TOP RECESS DIAMETER | 0.380 INCHES MINIMUM AND 0.390 INCHES MAXIMUM |
| ABPX | MATERIAL THICKNESS | 0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM |
| AAUB | HOLE DIAMETER | 0.320 INCHES MINIMUM AND 0.330 INCHES MAXIMUM |
| ABKV | OUTSIDE DIAMETER | 0.740 INCHES MINIMUM AND 0.750 INCHES MAXIMUM |
| CRKG | BOTTOM RECESS ANGLE | 90.0 DEGREES NOMINAL |
| HEAT | HEAT TREATMENT | AS FABRICATED |
| CSML | BOTTOM RECESS DIAMETER | 0.380 INCHES MINIMUM AND 0.390 INCHES MAXIMUM |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5621 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| STYL | STYLE DESIGNATOR | RECESSED BOTH SIDES |
| MATT | MATERIAL | STEEL COMP 420 OVERALL |