Part Number
Definition:
AN EXTERNALLY THREADED FASTENER WHOSE UNTHREADED PORTION IS OF A SPECIFIED GRIP LENGTH, PLATED OR UNPLATED, AND IS MACHINED TO A TOLERANCE OF ONE THOUSANDTH (0.001) OF AN INCH (0.025 MM) OR LESS OF A SPECIFIC DIAMETER FOR ITEMS ONE INCH (25 MM) OR LESS IN DIAMETER. ITEMS OVER ONE INCH (25 MM) IN DIAMETER SHALL HAVE A TOLERANCE OF FIFTEEN TEN-THOUSANDTHS (0.0015) OF AN INCH (0.038 MM) OR LESS. THE NOMINAL MAJOR DIAMETER OF THE THREADS SHALL BE AT LEAST ONE THOUSANDTH (0.001) OF AN INCH (0.025 MM) BELOW THE MINIMUM SHANK DIAMETER, BUT NOT BELOW THE MINIMUM MAJOR DIAMETER FOR APPLICABLE CLASS OF FIT, AS SHOWN IN THE SCREW THREAD STANDARDS, FED STD H28 AND/OR OTHER NATIONALLY RECOGNIZED STANDARDS. THE HEAD IS NOT DESIGNED TO BE HELD OR DRIVEN WITH AN INSERTED DRIVER, NOR IS IT DESIGNED FOR ROTATION BY THE THUMB AND FINGERS. A LOCKING FEATURE MAY BE INCORPORATED IN THE DESIGN OF THE HEAD OR THREADS. FOR ITEMS HAVING CLOSE TOLERANCE, AND FABRICATED FROM MATERIAL HAVING 160,000 POUNDS PER SQUARE INCH (1100 MEGAPASCALS) MINIMUM TENSILE STRENGTH, SEE BOLT, SHEAR. FOR ITEMS FABRICATED FROM MATERIAL HAVING LESS THAN 160,000 POUNDS PER SQUARE INCH (1100 MEGAPASCALS) MINIMUM TENSILE STRENGTH AND NOT HAVING A CLOSE TOLERANCE, SEE BOLT, MACHINE.
CAGE Information
| Code | Company |
|---|---|
| 56878 | SPS TECHNOLOGIES LLC DBA AEROSPACE D |
Federal Supply Class
Title
BOLTS
Inclusions:
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS6485 ASSN STD 1ST MATERIAL RESPONSE OVERALL OR AMS 6487 ASSN STD 2ND MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL OR NICKEL OVERALL |
| ANEE | GRIP LENGTH | 6.000 INCHES NOMINAL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| AAUR | GRIP DIAMETER | 0.748 INCHES MINIMUM AND 0.749 INCHES MAXIMUM |
| CQBC | MINIMUM TENSILE STRENGTH | 260000 POUNDS PER SQUARE INCH |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 1.439 INCHES NOMINAL |
| CMLP | THREAD QUANTITY PER INCH | 16 |
| AHYM | NOMINAL THREAD DIAMETER | 0.750 INCHES |
| AGAV | END ITEM IDENTIFICATION | F-111 ALL |
| AATB | WIDTH BETWEEN FLATS | 0.928 INCHES MINIMUM AND 0.940 INCHES MAXIMUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-8837,TYPE II,CLASS 3,TYPE II,CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL OR AMS 2416 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
| AASU | HEAD HEIGHT | 0.806 INCHES NOMINAL |
| CQFM | HARDNESS RATING | 51.0 ROCKWELL C MINIMUM FASTENER AND 54.0 ROCKWELL C MAXIMUM FASTENER |
| MATT | MATERIAL | STEEL COMP H11 OVERALL |
| AATC | EXTENDED WASHER DIAMETER | 1.415 INCHES MINIMUM AND 1.425 INCHES MAXIMUM |
| AASK | HEAD STYLE | DOUBLE HEXAGON EXTENDED WASHER |
| AASB | FASTENER LENGTH | 7.424 INCHES MINIMUM AND 7.454 INCHES MAXIMUM |
| AATD | EXTENDED WASHER THICKNESS | 0.152 INCHES NOMINAL |