Part Number
Part Number:
NSN:
NIIN:
Item Name:
LATHE , ENGINE
Definition:
CAGE Information
| Code | Company |
|---|---|
| 54522 | ACME-CLEVELAND CORP NATIONAL ACME CO |
Federal Supply Class
Title
LATHES
Inclusions:
INCLUDES SCREW MACHINES
Exclusions:
EXCLUDES SPEED LATHES; METAL SPINNING LATHES; CARTRIDGE CASE AND SHELL LATHES.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| AGLD | PERFORMANCE TYPE | LIGHT DUTY |
| BTYR | CARRIAGE LONGITUDINAL FEED OPERATION METHOD | HAND AND POWER |
| AWHA | BED TYPE | SOLID |
| APGF | DESIGN TYPE | SCREW |
| ELEC | VOLTAGE IN VOLTS | 220.0 AND 440.0 |
| AAXX | MOUNTING TYPE | FLOOR |
| BTYS | CARRIAGE CROSS FEED OPERATION METHOD | HAND AND POWER |
| BTWL | HEADSTOCK DRIVE TYPE | DIRECT PULLEY, BACK GEARED |
| BTTG | SWING OVER CROSS SLIDE | 6.250 INCHES NOMINAL |
| FAAZ | PHASE | THREE |
| BTSZ | SPINDLE SPEED QUANTITY | 8 |
| ZZZY | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | APGF,BTWB,BTZR,BTSZ,AWLX,ASHK,ACDC,ELEC,FREQ,FAAZ,AAXX |
| BTTD | RATED SWING | 10.000 INCHES MINIMUM AND 11.000 INCHES MAXIMUM |
| BTWM | HEADSTOCK CENTER TAPER SIZE DESIGNATOR | 2 MORSE |
| BTZR | THREAD QUANTITY RANGE | +4.0/+240.0 PER INCH |
| BTYQ | CARRIAGE QUANTITY | 1 |
| BTTB | SPINDLE SPEED RANGE IN RPM | +50.0/+1350.0 |
| BTYP | HOLE DIAMETER THROUGH SPINDLE | 1.375 INCHES NOMINAL |
| BTYW | GEAR CHANGE TYPE | QUICK |
| BTWB | THREAD CHANGE QUANTITY | 60 |
| ADQR | CENTER TO CENTER DISTANCE | 36.000 INCHES NOMINAL |
| AWLX | ELECTRIC MOTOR QUANTITY | 1 |
| ASHK | ELECTRIC MOTOR HORSEPOWER RATING | 1.500 |
| ACDC | CURRENT TYPE | AC |
| BTYT | CARRIAGE FEED CHANGE QUANTITY | 60 |
| BTTF | ACTUAL SWING OVER BED | 10.125 INCHES NOMINAL |
| AKSL | PURPOSE FOR WHICH DESIGNED | TOOLROOM |
| AKYD | ACCESSORY COMPONENTS AND QUANTITY | 3 JAW UNIVERSAL CHUCK 6 IN.; 2 CENTERS,SOLID,60 DEGREES,NO. 2 MORSE TAPER; 1 SPINDLE SLEEVE BUSHING,NO. 2 MORSE TAPER; 1 CHUCK,DRILL,NO. 2 MORSE TAPER; 1 STEADY REST; 1 TOOL POST |