Part Number
Part Number:
NSN:
NIIN:
Item Name:
HOSE ASSEMBLY , NONMETALLIC
Definition:
A LENGTH OF NONMETALLIC HOSE WITH FITTINGS ON ONE OR BOTH ENDS. FOR ITEMS WITHOUT FITTINGS, SEE HOSE, NONMETALLIC. EXCLUDES HOSE ASSEMBLY, AIR DUCT; AND HOSE ASSEMBLY, AIR DUCT, AIR BREATHING.
CAGE Information
| Code | Company |
|---|---|
| 87373 | PARKER-HANNIFIN CORPORATION DBA HOSE |
Federal Supply Class
Title
HOSE AND FLEXIBLE TUBING
Inclusions:
INCLUDES AIR DUCT, METALLIC, NONMETALLIC, AND TEXTILE FIBER HOSES AND THEIR ASSEMBLIES; FLEXIBLE TUBING AND THEIR ASSEMBLIES.
Exclusions:
EXCLUDES CONDUIT AND THEIR ASSEMBLIES (FSC 5975); LABORATORY TUBES (FSC 6640); MEDICAL AND SURGICAL TUBES (FSC 6515); RIGID TUBING AND THEIR ASSEMBLIES (FSC 4710).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | 29.500 INCHES NOMINAL WORKING |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | INAVY: HOSE ASSY 30IN |
| CQBD | BURST TEST PRESSURE | 9000.0 POUNDS PER SQUARE INCH |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CQRB | SEAT ANGLE | 37.0 DEGREES 1ST END AND 45.0 DEGREES 1ST END |
| THSD | THREAD SERIES DESIGNATOR | UN 1ST END |
| CRFY | FLOW ANGLE | 90.0 DEGREES 2ND END |
| ADLF | HOSE OR TUBING SPEC/STD DATA | SAE 100R2 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| FEAT | SPECIAL FEATURES | TWO LAYERS ARE INTERWOVEN WIRE |
| CQCS | LAYER COMPOSITION AND LOCATION | OUTER LAYER MOLDED RUBBER, SYNTHETIC ERR-100 |
| AGAV | END ITEM IDENTIFICATION | LIGHT AMPHIBIOUS RECOVERY CRAFT |
| CQBG | FIRST END SWIVEL ACTION CAPABILITY | NOT INCLUDED |
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END |
| ABJH | TEMP RATING | -40.0 DEG FAHRENHEIT SINGLE RESPONSE AND 257.0 DEG FAHRENHEIT SINGLE RESPONSE |
| AAJD | THREAD CLASS | 3B 1ST END |
| CQGH | FIRST END FITTING/COMPONENT AND MATERIAL | ERR-070 |
| AKUU | END CONNECTION DESIGN | ELBOW 2ND END |
| MEDA | MEDIA FOR WHICH DESIGNED | OIL, LUBRICATING, DIESTER BASE SINGLE RESPONSE AND HYDRAULIC FLUID SINGLE RESPONSE AND AIR SINGLE RESPONSE AND WATER SINGLE RESPONSE |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 16.500 INCHES |
| CQCS | LAYER COMPOSITION AND LOCATION | 2ND LAYER WRAPPED RUBBER, SYNTHETIC ERR-100 |
| CQGM | MAXIMUM OPERATING PRESSURE | 2250.0 POUNDS PER SQUARE INCH |
| CQJX | NOMINAL THREAD SIZE | 1.625 INCHES 1ST END |
| AARX | INSIDE DIAMETER | 1.250 INCHES NOMINAL |
| CQBB | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
| AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED STEEL WIRE ERR-100 |
| CMLP | THREAD QUANTITY PER INCH | 12 1ST END |
| CQCS | LAYER COMPOSITION AND LOCATION | 3RD LAYER BRAIDED STEEL WIRE ERR-100 |
| ADJM | INNER CONVEYING TUBE MATERIAL | RUBBER, SYNTHETIC |
| ABKV | OUTSIDE DIAMETER | 1.890 INCHES NOMINAL |
| AHNC | CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |